Features Thermoplastic Externall shell Removable and washable liner Removable and washable cheek pads Santitized hygienic treatment for inner fabrics Helmet interior anatomically designed Painted and UV-coated outer shell Lower protection rubber Adjustable peak Ventilation system Air extractors Micrometic retention system 1350gr
Outer garment Fibretech 500D, soft & stong fabric Softshell panels Armex : high resistance to abrasion on forearm Membrane Waterproof & breathable membrane Isolation 120 g. removable thermo-alu lining Protection Adjustable approved elbow protectors Approved shoulder protectors Pocket for approved back protector Comfort Regular fit Fixed mesh lining Anti-flutter system on sleeves Cuff fastening Jacket bottom tightening by elastic cord and stopper High comfort collar Reflective material Zip for connecting with trousers 2 outer pockets 1 back pocket 3 inner pockets Puls Air ventilation system Fitex system waist fastening
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
The SP ConnectTM Moto Mirror Bundle lets you mount your smartphone to your scooter or motorbike in seconds. Fasten the Mirror Mount to a mirror of your scooter or crossbar of your motorcycle and you are ready to mount the SP ConnectTM Phone Case (or Universal Interface) by placing it on the mount and turning it 90° clockwise. Your mobile phone is securely positioned right in your field of vision, allowing you to navigate, access your playlists or read messages. Use the Weather Cover to protect your phone from rain and dirt as well as to provide additional shock resistance if necessary. Included 1x Phone Case 1x Weather Cover 1x Mirror Mount 3x Plastic spacing inserts 1x StandTool 1x Microrail Adhesive Phone Case Slim, protective, functional Use of all ports and buttons 3-layer case construction for ultimate safeguarding Weather Cover Protects against rain, sweat, dust or mud Adds shock resistance to your phone Mirror Mount Low profile Portrait / Landscape Orientation 360° rotation Fits most motorcycle mirrors ( Ø 10 - 16 mm or 0,39 - 0,63 inches ) Note Thick screen protectors or gloves can limit the usability of your touchscreen in combination with the Weather Cover. The Weather Cover can further affect the homebutton functionality of iPhone 8, 8 Plus, 7 & 7 Plus. This can be compensated by enabling the software homebutton (Assistive Touch). *example picture
The BLAZE saddlebags with removable support arms impress with their sporty appearance, light weight and smart attachment system. Developed specifically for sporty motorcycles, the saddlebags have a minimal effect on driving characteristics. When travelling without luggage, the removable support arms can be detached with a simple step, leaving only inconspicuous holders behind on the bike. The bike-specific developed removable support arms, a powerful hook and loop fastener and an additional safety belt with click fastener ensure the best grip and prevent the bags from swinging or flapping - even at high speeds. BLAZE Saddlebag BLAZE saddlebags with bike-specific removable support arms allow vehicles to be converted from sporty motorcycles to touring vehicles in seconds Light weight and sporty look A powerful Velcro strap additionally secures the left and right saddlebags and offsets the weight of the luggage Zippered volume expansion Main pocket is loaded from the top Outer pocket with zipper Practical carrying handle Reflective details for more safety in traffic Made from durable, highly UV-resistant 1680D ballistic nylon with water resistant interior coating BLAZE Removable support arms Removable support arms prevent contact between saddlebags and tires One-time mounting of the bike-specific, inconspicuous brackets for the removable support arms Removable support arms attachable and removable in a few simple steps Material: Stainless steel / Polyamide Color: silver / black Included in delivery 2 x BLAZE Saddlebag 2 x BLAZE Removable support arms 2 x Waterproof inner bags 1 x Adhesive protective foil Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon / 1680D Ballistic Nylon Color: black / grey Size: 44.0 x 14.0 x 30.0 cm / 17.3 x 5.5 x 11.8 in Total Weight: 1.2 kg / 2.6 lb Capacity per bag: 14.0 - 21.0 liter Total capacity: 28.0 - 42.0 liter Matching
