Specification:Input Voltage12 VMaximum Voltage24 AMaximum Flow Rate3.0L/minMaximum Pressure0.9mpaMotor Speed3100-3300(r/min)Using time50 MinBatterycapacity2500 mAPeak machine pressure24.6 barInstallation and Operation:①Dead work: Unload battery pack,install battery pack②Install straight sprinkler head ,after the nozzleis installed,the left and right nozzles are checked to see if the installation is in place.③Connecting pipe,when the water pipe is installed, check the connection of the light pipe.If the water pipe does not fall off ,it has been installed in place.④Connecting self provided plumbing(selection):remove the water pipe connector. Connect the home garden water pipe matching the interface.⑤Open the machine: For the first time, the air in the water pipe should be discharged. The method is to place the washing machine in the position of waist height.(1.5 meters), and then select the high voltage mode. The water enters the water pipe and is ejected from the washing machine before cleaning.The whole process takes about 20 seconds.⑥Selection of water spray effect:Water effect must be selected according to the working conditions, rotating head. 0-40 degree for cleaning,and suitable for irrigation. Do not switch the spray after boot.⑦Clean: please clean the machine with clean water after sea water is used.Security Warning:Battery pack safely warning(1)Do not disassemble, open or cut up battery pack.(2)It is forbidden to short-circuit the battery pack.Do not place batteries i
