Scott 80S Works Pro Tear Off 3 Pack Tear Offs, Size One Size

Features
Equiped with AFS system and 3D mesh lining for thermoregulation, it will be performant in summer and mid-seasons. Put in the specific removable lining and you’ll obtain a warm and waterproof garment for winter Thick removable polar thermal lining. An excellent protection against the cold that integrates a specific insert Internal Polymesh technical lining, waterresistan, breathable, light and pleasant to wear The back and chest feature an internal 3D honeycomb lining which improves the strength of the fabric, offers increased comfort and better thermoregulation in all weathers

Junior riders and kids crash. Sometimes hard, and then sometimes very hard! Now there is finally a solution that will minimize the risk of a head and brain injury, and that is to get the best junior/kids helmet you can find that reduces both rotation and impact energy to your head and brain! The GPX 4.5 Injected Polymer Compound helmet offers world-class protection with 360 ? Turbine Technology. Turbines made of an energy absorbing material, are set inside the helmet. This technology has two main advantages, namely reducing rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. It also has a smaller outer shell volume, which assists in reducing rotational acceleration of the head and brain, proving that a smaller helmet shell is better. Our multi-density, V-shaped impact foam is molded directly to the outer shell, enabling us to reduce the outer shell size and still achieve the highest level of impact protection. This unbeatable combination makes all Leatt riders winners. The helmet also provides ample ventilation, another feature most of us cannot get enough of and, most importantly, these vents work even at very low speeds. So, the next time a junior rider crashes, see to it that he is properly protected! Features
Injected Polymer Compound Shell 360° Turbine Technology Reduces up to 30% of head impact at concussion level Reduces up to 40% of rotational acceleration to head and brain Reduced Outer Shell Volume A 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner Optimal Neck Brace Compatibility Maximized ventilation optimized for off-road racing and effective even at very low speeds Visor with breakaway function for rotational reduction in a crash Emergency cheek pad removal Hydration ready (with optional hands-free kit) Certified and tested: ECE 2205 or DOT Weight: ECE from 1150g
Sizes
M: 51-52 cm L: 53-54 cm

Outer material
Softshell Palmskin goatskin
Membrane
Waterproof & breathable membrane
Insulating Material
Padded lining 110 g Comfort lining Polyform
Protectors
Reinforcement with insertion tray Reinforcement of the palm
Comfort
Double adjustable wrist reflective Sensor system Long cuffs

Specification:Input Voltage12 VMaximum Voltage24 AMaximum Flow Rate3.0L/minMaximum Pressure0.9mpaMotor Speed3100-3300(r/min)Using time50 MinBatterycapacity2500 mAPeak machine pressure24.6 barInstallation and Operation:①Dead work: Unload battery pack,install battery pack②Install straight sprinkler head ,after the nozzleis installed,the left and right nozzles are checked to see if the installation is in place.③Connecting pipe,when the water pipe is installed, check the connection of the light pipe.If the water pipe does not fall off ,it has been installed in place.④Connecting self provided plumbing(selection):remove the water pipe connector. Connect the home garden water pipe matching the interface.⑤Open the machine: For the first time, the air in the water pipe should be discharged. The method is to place the washing machine in the position of waist height.(1.5 meters), and then select the high voltage mode. The water enters the water pipe and is ejected from the washing machine before cleaning.The whole process takes about 20 seconds.⑥Selection of water spray effect:Water effect must be selected according to the working conditions, rotating head. 0-40 degree for cleaning,and suitable for irrigation. Do not switch the spray after boot.⑦Clean: please clean the machine with clean water after sea water is used.Security Warning:Battery pack safely warning(1)Do not disassemble, open or cut up battery pack.(2)It is forbidden to short-circuit the battery pack.Do not place batteries i

The Caberg flip-up helmet Droid with innovative technical solutions is equipped with the dual homologation P / J and with two individually adjustable air vents: no fogging of the visor and maximum safety. Features
Flip-up helmet with one-handed operation Front part locked in unfolded state Helmet is by folding the front part as a jet helmet mobile homologated as integral and open face helmet P / J Scratch-resistant visor including Pinlock® integrated sun visor easy and quick change of visor Visor and head ventilation Chin guard has two individually adjustable ventilation Anti-rain profile Double anti-turbulent neck protection removable windstopper removable and washable interior Micro Metric helmet closure high-quality multi-layer coating with UV protection prepared for Bluetooth communication set ECE 22.05 Material: Thermoplastic Weight: 1.600g (+/- 50g)

*example picture
To upgrade or downgrade the lining of your Arai helmet, you can order the lining in different strengths. To know the strength of your actual lining, please have a look on the label which is fastened on the lining in your helmet. Features
For all Chaser-X models 100% Polyester Easily cleaned