Bering Zander Motorcycle Textile Jacket, black, Size XL, black, Size XL

Every stitch of PRIME PRO racewear was designed with intent and purpose. Utilizing premium materials and detailed craftsmanship, PRIME PRO is our most advanced racewear to date. Built around the notion that unrestricted mobility, minimal weight and athletic fit all allow the rider to work more efficiently with the motorcycle, PRIME PRO is designed to reduce interference between man and machine. From concept to creation, PRIME PRO was developed with insight and testing from our elite riders to deliver next level performance. Bring a little slice of paradise to your ride. With an artist inspired “aloha” vibe, the Floral kit is sure to set you apart from the sea of monotony on the starting gate. Built on our signature PRIME PRO chassis, the Floral kit is made for hangin’ loose and getting pitted. Features
Hybrid fit with set-in style tailored sleeves Taped collar and cuffs Minimal seams for maximum comfort Fully ventilated arms and back panel Moisture wicking material keeps you dry Tail silicone print helps keep jersey tucked in Flat-stitched seams minimize irritation

Specification:Input Voltage12 VMaximum Voltage24 AMaximum Flow Rate3.0L/minMaximum Pressure0.9mpaMotor Speed3100-3300(r/min)Using time50 MinBatterycapacity2500 mAPeak machine pressure24.6 barInstallation and Operation:①Dead work: Unload battery pack,install battery pack②Install straight sprinkler head ,after the nozzleis installed,the left and right nozzles are checked to see if the installation is in place.③Connecting pipe,when the water pipe is installed, check the connection of the light pipe.If the water pipe does not fall off ,it has been installed in place.④Connecting self provided plumbing(selection):remove the water pipe connector. Connect the home garden water pipe matching the interface.⑤Open the machine: For the first time, the air in the water pipe should be discharged. The method is to place the washing machine in the position of waist height.(1.5 meters), and then select the high voltage mode. The water enters the water pipe and is ejected from the washing machine before cleaning.The whole process takes about 20 seconds.⑥Selection of water spray effect:Water effect must be selected according to the working conditions, rotating head. 0-40 degree for cleaning,and suitable for irrigation. Do not switch the spray after boot.⑦Clean: please clean the machine with clean water after sea water is used.Security Warning:Battery pack safely warning(1)Do not disassemble, open or cut up battery pack.(2)It is forbidden to short-circuit the battery pack.Do not place batteries i

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

The certified Andes Touring Glove features a double wrist closure to help keep glove in position and seal out the elements, while its premium, multi-material chassis incorporates the innovative Outdry® bonded membrane for guaranteed waterproofing and breathability but without excessive material bulk in order to provide improved sensitivity on the bike’s controls. Construction
Premium leather, suede, softshell and advanced stretch textile main chassis Softshell and stretch fabric on the backhand for freedom of movement Soft viscoelastic PU foam compound knuckle guard which is ergonomically profiled Reflective inserts to increase rider visibility Features an innovative heat-bonded outer shell membrane construction Outdry®, which provides an impenetrable layer with no seams, preventing water collecting between layers Rubber reinforcements with foam padding on thumb and palm Leather stretch accordions on fingers and thumb to increase flexibility and fit
Protection
Certified level 1
Features
Ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement Double hook and loop grip closure system on wrist Long cuff design offers extended coverage of wrist area Touchscreen compatible finger-tip

An advanced, multi-panel poly-textile construction offering excellent weather protection and with strategically position zippered air ventilation ports to allow for precision control of internal cooling, the certified Stella Raider Drystar® Pant is specifically designed for a women’s anatomical fit and features class-leading certified protection. Construction
Multi-fabric shell construction panels composed with stretch fabric, soft touch polyester, advanced polyester on back and inner leg Internal knee compartment allows adjustment of protection to fit in various leg lengths Extended lower leg zippered opening Extended zippered ventilation strategically placed across the thighs Pre-curved leg construction for enhanced fit and comfort in the riding position Dynamic stretch panels around crotch, waist and back of knees for better freedom of movement Stretch accordion above the knees for improved fit and comfort Integrated high visibility reflective details on lower legs to improve rider visibility in varying light conditions Premium YKK zippers Fixed Drystar® membrane
Protection
Hip pad compartments with PE comfort padding (Alpinestars level 1 certified Nucleon hip) Level 1 certified Bio-Armor knee protectors Certification 89/686/EEC
Features
Hook and loop strap on waist and leg adjustments for precision fit Deep, zippered hand pockets for safe storage of items Waist connection zipper for secure integration with Alpinestars riding jacket

Specification:Certification: CCC,CE,CQCSwitch Type: Push Button SwitchFeatures: Illuminated symbol LOGOMaterial: Zinc Alloy AluminumCurrent: 5AItem Type: Push Button SwitchesType: 4 Momentary(Self-Rest When Press The Button, Switch On, When Release, The Actuator Return) ,Others Are Latching(Self-Locking: When Press The Button, The Actuator Stay In Position Until Pressed Again)LED color: Red, Green, Blue, Yellow, WhiteVoltage: 12V 24V 36VMounting hole size: 16mmLength Of Socket Lead: 20CMPackage Included:1 X Push Button(Socket Lead Not Included)or1 XSocket Lead(Push ButtonNot Included)