Ixon Cathelyn Ladies Motorcycle Jeans Pants, blue, Size L for Women, blue, Size L for Women

Rib and PU-Leather Splicing Stand Collar Single-Breasted Woolen Coat

An exact replica of the Flight jacket, the Tucker features all the details found on the famous jacket worn by American pilots during World War II. Chic and understated while satisfying all the technical constraints imposed for everyday use on a motorcycle. Outer garment
Non-grainy & thick Wasko leather
Isolation
Removable thermal lining
Protection
Personal Protection Equipment approved shoulder protectors Adjustable approved elbow protectors Pocket for approved back protector
Comfort
Fixed mesh lining Collar and wrist lined with a synthetic fur Ribbed cuffs and ribbed waist Wrist tightening by means of internal adjustment 2 outer pockets Reflective material

'Soft Active Jacke Pro' ist 100 % made in Italien Multisport Sicherheitsweste bestehend aus Back Protector (CE genehmigt EN1621-2 Lev.2), Brustschutz (CE genehmigt EN14021), Arme und Rippen wachen. Die begrenzte dicke Polsterung, seiner Leichtigkeit und herausragende fi t gewährleisten ausgezeichnete Stabilität und Komfort.Hauptmerkmale: Seite Reißverschluss; Elastischen und verstellbaren Bund; HCD - Helm Kontakt Dämpfer (Polster auf der Seite der Hals, die Kontakte des Helmes mit der Schlüsselbeine zu erweichen); Kontaktfläche in S.R.T. (Schweiß entfernen Textil)

The certified Andes Touring Glove features a double wrist closure to help keep glove in position and seal out the elements, while its premium, multi-material chassis incorporates the innovative Outdry® bonded membrane for guaranteed waterproofing and breathability but without excessive material bulk in order to provide improved sensitivity on the bike’s controls. Construction
Premium leather, suede, softshell and advanced stretch textile main chassis Softshell and stretch fabric on the backhand for freedom of movement Soft viscoelastic PU foam compound knuckle guard which is ergonomically profiled Reflective inserts to increase rider visibility Features an innovative heat-bonded outer shell membrane construction Outdry®, which provides an impenetrable layer with no seams, preventing water collecting between layers Rubber reinforcements with foam padding on thumb and palm Leather stretch accordions on fingers and thumb to increase flexibility and fit
Protection
Certified level 1
Features
Ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement Double hook and loop grip closure system on wrist Long cuff design offers extended coverage of wrist area Touchscreen compatible finger-tip

Der Rumble ist ein thermoplastischer Crosshelm mit einer aktualisierten Form. Schale aus verstärktem, thermoplastischem Harz durch Spritzguss. Innen aus Polystyrol in zwei Größen (M und L) um die am besten passende Größe zu bekommen. ECE 22-05 Wangenpolster komplett herausnehmbar und waschbar mit unterschiedlicher Dicke für eine perfekte Anpassung des Helmes Innenschale komplett herausnehmbar und waschbar, in verschiedenen Stärken für eine vollständige Anpassung des Produkts. Die interne herausnehmbare Schale wurde für einen gleichmäßigen Stand auf dem Kopf untersucht. Die sichtbaren Kanäle ermöglichen eine Luftströmung, so dass die Temperatur im inneren Teil des Helms überprüft und die heiße Luft durch den hinteren Teil abgelassen werden kann. Die Schale ist aus Polystyrol mit Kanälen Im vorderen Teil gibt es obere und hintere Belüftungsöffnungen, die bei der internen Helmbelüftung helfen. Kinnschutz mit Frontbelüftung Die äußere Hülle hat Rippen um die Luft besser zu kanalisieren Helmschirm einstellbar und leicht austauschbar

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.