Bagster Adventur Baglocker, tank bag

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Motorcycle Voltage Regulator Rectifier For Honda TRX400 VT750 XL650 TRX350Description:100% brand newColor: as in pictureEasy to install,just plug and playPrevents over charging battery and improve charging capabilityWith heat sink fins for better coolingFitment:Please make sure you get a correct size before you buySuzuki DR250 1990-1995Suzuki DR350 1990-1999Suzuki SV650 1999-2002Suzuki LS650 Savage 1986-2012Package Included:1 x Motorcycle regulator rectifier ForSuzuki

Features
S.E.P. supports ideal moisture transfer quick re-drying time odourless supports the natural position of the body 1st layer of modern sportswear

Features
Waxed canvas Waterproof & breathable membrane Aluminum removable thermal lining Personal Protection Equipment approved shoulder protectors Adjustable approved elbow protectors Pocket for approved back protector Hard mesh fixed lining 5 outer pockets 3 inner pockets Adjustable cuffs by press studs Adjustable waist by buckle and press studs Adjustable arms Collar strap for adjustments Padded elbows and shoulders

Description:1. Useful for speeding up demisting and defrosting.2. Prefect for in-car, or camping, keeps you warm in the winter.3. Enjoy warm in the cold winter, or enjoy cool in the hot summer.4. High-temperature air outlet for the heater can ensure fast heating and convenient warming effect5. Quickly heating within 1 mins, efficient heat dissipation design, warm your winter on the road to arrive your destination.Feature:Color: BlackVoltage: DC 12VPower: 150WModes: Hot airnatural wind, 2 in 1Size: Approx. 14x11x7cm/ 5.52x4.33x2.76Cable Length: Approx. 130cm/ 51.18Package Included:1 X Car Heater Fan1 X Sticker

Our first non-impact protective glove and your second skin. The all-new MicronGrip palm is setting a new standard for gloves in this price range and is guaranteed to impress. The upper hand’s stretch material is both lightweight and offers good airflow whereas the pre-curved, seamless palm makes this a truly good glove. It’s easy to forget that you are wearing these ‘barely-there’ gloves. Features
MicronGrip Palm Super slim with superior handlebar feel Excellent dry and wet grip Very durable with touch screen function Silicone grip print Pre-curved, snug fit and seamless palm Vented, Lite upper-hand material Multi-ply, nylon thread stitching