Marushin 999 RS Comfort Laser, integral helmet

Merlin Elmhurst Motorrad WachsjackeEigenschaften:Eine einzigartige Kombination aus Halley Stevensons® schottisch gewachster Baumwolle und der thermischen Outlast® Innenfutter-Technologie 8oz trocken (12oz nass) Halley Stevensons®, schottisch gewachste Baumwolle Preisgekröntes abnehmbares Outlast® 'Universe' thermoregulierendes Innenfutter Reissa® Active wasserdichte und atmungsaktive Membran Sicherheitsgeprüfte Schulter- und Ellenbogenprotektor mit sicherheitsgeprüftem Rückenprotektor Erweiterung der hinteren Schulterplatten für mehr Flexibilität und Komfort YKK®-Reißverschlüsse mit durchgehendem Antik-Finish Merlin-Druckknöpfe Mehrere Taschen (ein und aus) und Einstellpunkte Kurze YKK®- Jacke zu Hose Verbindungsreißverschluss

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

We all crash. Sometimes hard, and sometimes even harder! There is a solution to minimize the risk of a head and brain injury, however, and that is to get the best helmet out there that can reduce both rotational acceleration and impact energy to your head and brain. The GPX 4.5 Injected Polymer Compound helmet offers world-class protection with 360 ? Turbine Technology. Turbines made of an energy absorbing material, are set inside the helmet. This technology has two main advantages, namely the reduction of rotational acceleration to the head and brain and absorption of energy upon impact at concussion level. The smaller outer shell volume also adds to its list of benefits by reducing rotational acceleration, proving that a smaller shell is better. Our multi-density, V-shaped impact foam is molded directly to the outer shell that makes it possible for us to reduce the outer shell size and achieve the highest level of impact protection! An unbeaten combination which makes all Leatt riders winners! Ventilation is another feature most of us cannot get enough of. Look no further, Leatt helmets provide ample ventilation, but most importantly, the vents work even at low speed. So next time you crash, see to it that you are properly protected. Features
Injected Polymer Compound Shell in three sizes 360° Turbine Technology Reduces up to 30% of head impact at concussion level Reduces up to 40% of rotational acceleration to head and brain Reduced Outer Shell Volume A 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner Optimal Neck Brace Compatibility Maximized Ventilation Optimized for Off-Road racing and effective even at very low speeds Visor with breakaway function for rotational reduction in a crash Emergency cheek pad removal Hydration ready (with optional hands-free kit) Certified and tested: ECE 2205 or DOT Weight: ECE from 1150g

* The lens is designed for the roll-off system * 45mm wide belt * Silicone-coated tape to prevent slippage | Article: Just1 Iris Kickflip Motocross Goggles, white-red | Article: Just1 Iris Kickflip Motocross Goggles, white-red, white-red, Size One Size

Specification:Color: ClearModel: 926588Material Type: Glass SteelSticker Placement: InternalDimension: Approx 232 x 112mmExternal Testing Certification: CEThickness:[Glass + release film] = 0.3mmYear:For Peugeot 3008 4008 5008 2017 2018Product Name: Navigation Screen Steel Protective FilmFeatures:1.0.3mm slim experience,keep touching sensitive, better smooth touching feeling.2.9H hardness: Anti-explosion, Anti-oil; Automatic Adsorption, No residue when removed.3.The tempered film contains an oleophobic and waterproof layer that can be restored with just one rub.4.The product is scratch-resistant, waterproof, oil-proof, explosion-proof, ultra-thin, and highly transparent.5.Ninety-nine percent high light transmission, HD reduction.High definition give you a clear and true using experience.6.Just clean the screen, align it and put it down, the film can be automatically adsorbed, no bubbles left, easy to operate.7.The use of advanced explosion-proof technology to strengthen the hardness, can effectively reduce the impact, reduce scratches.Even if it breaks, it will not produce debris, it is safe to use.Fitment (For the reference):For Peugeot 3008Note:1.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)2.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.3.There are no instructions included in this kit.If you want to know how to use or install it please contact us by email

Specifications:Name: Universal Car Seat Mat Cover PU Leather Breathable Cushion PadModel: E63116Type: Single Front Seat CoverOptional Color: Black/ BlackRed/Coffee/Green/Beige/BlueMaterial: PU LeatherQTY: 1 PCFeatures:- Made of PU leather material, comfortable and smooth.- Natural environmental PU leather gives delicate feeling.- Suitable for year round use and for all cars.- Protect the car seats, and keep the car the same.Note:Due to the light and screen setting difference, the item's color may be slightly different from the pictures.  Packaging Included:1 X Front Seat Cover