Dichtes und geschmeidiges Kuh-Leder Leder mit Perforierung an Brust Lederstretch im hinteren Schulterbereich Stretch mit Faser-Verstärkung an den Innenarmen Herausnehmbare Weste ohne Ärmel als Winterfutter Außenprotektoren an Ellbogen und Schulter. Racingkragen Nackenabdeckung mit Neopren Weitenregulierung mit Klett und Reiβverschluss an den Handgelenken 2 Außentaschen 2 Futtertaschen 2 Innentaschen 360° umlaufende Reiβverschlussverbindung in Taillenhöhe Reiβverschlussverbindung am Rücken
For many years Premier has produced and marketed some of the best off road helmets available on the market and now in his 2017 collection, the Italian company introduces Exige, a model that combines all the Premier know-how in this specific sector. The Exige helmet has the outer shell molded in high impact resistance thermoplastic material. Its shape has been design to be particularly resistant to impacts and for the use of the neck brace. The inner shell is printed in eps of different density and in two sizes, to absorb the energy generated by an impact. In the off road helmets the internal linings are very important and for this reason on the Exige the internal padding are removable and washable, with eye-catching camouflage fabric, hypoallergenic and with Sanitized treatment, which guarantee excellent breathability and comfort. The functional ventilation system is composed of an air conveyor positioned on the upper central part of the edge of the shell, two air intakes positioned below the peak and covered by a wire mesh and another air ventilation on the chin guard. The comfortable chinstrap is equipped with double D locking ring. The helmet also has a nose guard, fixed to the top of the chin guard. The peak has been designed to offer no resistance to air, even at high speeds and it s adjustable. Like all the Premier helmets also Exige is approved according to the ECE 22-05 homologation. Sizes range from XS to XL. This Premier helmet is available in three different graphic, for a total of eight proposals.
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Description:1.Fully submersible and perfectly sealed, waterproof spotlight adds a dazzle of color to your pond or fountain2.Comes with LED bulb, 180 degree direction3.Can be mounted vertically or horizontally, adjustable stand lets you point the light at different angles4.Ideal for boat5.Super bright and long-lasting. Easy to installSpecification:Output Power10WInput VoltageDC 12VLifespan50000 HoursMaterialAluminumWaterproof RateIP68Shell ColorBlackPackage Included:2 XIP68 Waterproof Underwater LED light
Casque Astone GT800 Evo Kaiman Les casques Astone couvrent tous les segments du marché pour répondre aux différents besoins des consommateurs, des casques complets aux casques croisés. Cette série de casques allie sécurité, esthétique et confort tout en se positionnant comme le meilleur rapport qualité/prix.fonctionnalités: système de ventilation protecteur du nez boucle micrométrique Pare-soleil visière auto-régulatrice Thermoplastique (ABS) Doublure intérieure amovible/lavable Visor Pinlock prêtSpécifications: ECE 2205 Poids: environ 1450 (-50g)Tailles: XS: (53/54) S: (55/56) M: (57/58) L: (59/60) XL: (61/62) XXL:(63/64)Contenu: 1x Casque Astone GT800 Evo Kaiman
500 D polyester fabric detachable Reissa®-Membrane: 100% waterproof, 100% windproof, breathable detachable thermo lining shoulder and elbow YF protectors, certified acoording to EN 1621-1 detachable crash foam at back upgradeable with SaS-Tac® SCL-19 back protector, certified according to EN 1621-2:2014 3M Scotchlite™ reflectors AirVent ventilation zips 3 outer pockets 2 waterproof inner pockets connection zip saftey seams
Description:This full chrome trim rings set designs for motorcycle stereo accent.Protect the parts edges against from scratches.Make your motorcycle get the fashionable and charming appearances.Easy installtion,No any modification.Specification:Material: Chrome IronColor: ChromeSize: 36.5x10.5cm (LxW)Fitment: Harley-Davidson Electra Glide, Street Glide, Road Glide Touringand Trike models 1986-Up (will not fit dakota digital)Note:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3.The color of the actual items may slightly different from the listing imagesdue to different computer screen, thanks for your understanding.4.Instruction is not included,professional installation is highly recommended.Package Included:1 X Stereo Accent Trim Cover
