Scorpion Exo 500 / 1000 Visor, blue, blue, Size One Size

Features
Former JUMP Glove Silicone printing on palms and finger tips for improved grip and braking control Long lasting and flexible material for the perfect fit Lightweight design with bold, non-fade graphics Seamless rollover fingertips Synthetic leather palm, with double layer thumb reinforcement Adjustable Velcro? wrist closure for secure and adjustable fit Pre-curved tailoring for the best fit possible, and helps to eliminate arm pump

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Specification:Blue Lights OnBlack 2 port USB socketPower input: DC 12V-24VOutput: 5V 4.2A DC (Total)Material: ABS + Electronic componentsUSB socket power output: DC 5V 2.1A+2.1ADimension: 32x20x56mm (1.26x0.79x2.21 inches)Features:1. Fit for Toyota2. Suitable for interior or exterior use3. Easy to install. Comes with wiring and fuse.4. USB charger with 12-24V power sockets/outlets.5. Dual USB ports, charge two different devices simultaneously6. A replacement or extra 12-24V DC Dual USB charger for Toyota7. Safe to use. Over-heated, over-current, over-charging protection8. Intelligent charging technology, which provides fast charge for mobile devices USB 2.09. Compatible with digital cameras, mobile phones, MP3 players, digital cameras, mobile devices and USB accessories.Package included:1 X USB Car Charger1 X Wiring

AGV The K-3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets.
Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.
Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.
The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.
The AGV K-3 SV has been designed to accept the new integrated communication platform SHARE. General features
Removable nose guard Removable windproof chin strap protection Sanitised Dry-Comfort fabrics Micrometrically adjustable strap retention system Fully removable and washable 3D inner liners
Visor
Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge New XQRS (X-tra Quick Release System) for tool-free removal and replacement of visor in seconds. GT2 (sizes ML-L-XL-XXL) and GT2-1 (sizes XS-S-MS) visors in scratch resistant and anti-fog polycarbonate with 100% UV protection Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
Exterior and interior shell
2 sizes of HIR-TH external shell (High Resistance Thermoplastic Resin) Inner EPS shell in 4 sizes Inner shell in EPS in 4 sizes, shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
Ventilation
Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
Accesories
Anti-theft ring on strap

Spidi Hydroback bag to be inserted into Hydroback-ready touring jackets.

strapazierfähiges Rindnappaleder anilin Innenhand aus Känguruleder Schoeller®-Keprotec®-Verstärkungen vorgekrümmte Finger Stretcheinsätze zwischen den Fingern und an den Seiten Sturzpads atmungsaktiv