Free
Support
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
This Marshalltown Masons Line is made from twisted nylon that has been heat set after winding to increase stability. Not affected by mortar, oil or mildew and will not absorb water. Suitable for staking out sites, concrete and landscaping layout and brick/block laying. Made in the U.S.A1 x Marshalltown M632 Masons Line 76.2m (250ft) - Fluorescent Yellow
All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : Black.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.
The Monument 781T DIY telescopic adjustable basin wrench is designed for use when tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Extends from 25 - 43cm
This Teng Tools socket is a professional 3/4 inch drive, metric hexagon socket. The socket is manufactured from chrome vanadium steel for strength and durability and has an attractive satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.The TENM340524 Hex 3/4 inch drive socket has the following specifications:Size: 24mm. Length: 51mm.
These Masterlock Heavy-duty ratchet tie-downs designed to secure luggage or other loads to cars, van roof racks and/or trailers. They are manufactured from very strong webbing material, will withstand all weather conditions and are fitted with an easy-to-use heavy-duty ratchet cam mechanism and J-type hooks. Includes PVC grip on the ratchet and strap trap tie-back for excess strap. TUV certified.The MasterLock Ratchet Tie-Downs with J Hooks and the following specification: Length: 8.25m. Width: 50mm. Load Capacity: 2,250kg. Max. Capacity: 4,500kg.