Tijeras multifuncionales de alta precisión para jardinería Tijeras de podar manual Rama cortadora para árbol de jardín

Powerful and long-life DC motor with overheating and overload protection. Robust solid metal drill chuck with chucking force safety device. Short design of 180 mm. Perfect for use with stepped drill bit, e.g. for drilling initial holes in sheet metals.17 torque levels – force can be easily metered up to 30 Nm for tough screw connections. 2-speed solid metal gearbox. Bright LED light on housing. 2.5 Ah battery capacity for up to 350 screw connections (5 x 40 mm). FEIN SafetyCell technology. Protects the battery and tool from overload, overheating and total discharge. The battery charge can be read off the battery. Includes belt holder and magnetic bit holder. One charger for all FEIN Li-ion batteries of all voltage classes.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Type:Tall / ­High Arc,Pull-out / ­Pull-down; Style:Vintage,Contemporary; Finish:Painted Finishes; Faucet Type:Kitchen faucet; Installation Type:Free Standing; Number Of Handles:Single Handle; Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Installation Hole Diameter:3.5; Faucet Body Material:Brass; Faucet Spout Material:Brass; Installation Holes and Handles:Single Handle One Hole; Features:Rain Shower,Rotatable,Pullout Spray,Waterfall; Shipping Weight:1.842; Net Weight:0.000; Listing Date:10/11/2019; Production mode:Self-produce; Special selected products:COD

IRWIN Record Hinged Pipe Vices are guaranteed against breakage with exceptional strength in load bearing areas. Single V-jaw in frame moves between two V-jaws in base to hold even the smallest pipe sizes securely. Self locking frame is reversible for right or left-hand operation. Replaceable Steel Jaws and can be fitted to bench and or stand.IRWIN Record 92.1/2C Hinged Pipe Vice. Pipe Capacity: 3 - 60mm (1/8 - 2.1/2in).

Stanley Roller Cabinets are designed for use in conjunction with the module system, with 3 modules fitting each drawer. They feature a central locking system for security. The drawers of the cabinets have 35mm ball bearing slides for full drawer extension, non-slip mats for the drawers are included. The cabinets have swivelling and locking wheels for manoeuvrability and security. Load capacity: 300kg. Number of drawers: 4.

The Milwaukee BS125 Corded Deep Cut Band Saw has a large cutting capacity of up to 125 x 125mm material diameter. Constant power technology maintains cut speed in the toughest applications for optimal performance. There is a 4 step variable speed selection (0-116/min) and a gear protecting clutch, that extends gear and motor life. The slim, all metal motor housing design increases manoeuvrability and there is LED work surface illumination for enhanced visibility. The saw features a tool-free blade locking mechanism for easy blade changes and a tool-free adjustable shoe. Comes with a Heavy-Duty Carry Case. Specification Input Power: 1,200 Watt.No Load Speed: 0-116/min.Capacity: 125 x 125mm. Blade Length: 1140mmWeight: 6kg.The Milwaukee BS125 Deep Cut Band Saw 1200 Watt 240 Volt Version.