Free
Support
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
This mini cam is the best way to capture and relive exciting moments. Easy to use, it allows immediate viewing of the shots taken thanks to its touchscreen display.
Its compact size, rounded edges and reliability make it extremely practical. Easy-mount attachment kit included as standard.
Features hardware techniques:
LCD display screen: 2.0-inch touch screen Image sensor: 1.3 million pixel (CMOS) Storage medium: microSD card Image resolution: 5.0 Mega Pixel (2592x1944), 3.0 Mega Pixel (2048x1536), 1.3 Mega Pixel (1280x960) Video resolution: 720P (1280x720) Pixel@23-31fps VGA(640x480) Pixel@49-63fps (default) Video with audio: YES Built-in microphone: YES Interface: USB 2.0 Power Supply: Built-in 3.7V rechargeable lithium Battery life: about 1 hour Water-resistant: up to 10 m Dimensions: 66x43x27mm Weight: 46g (without battery)
Technical Details:
High definition recording: YES Recording assisted: YES Anti vibration: YES Digital zooming: 4X Camera lens: F3.1 f=9.3mm Shutter: Electronic Visual angle: 120° EV compensation: Auto Sensitivity: Auto White balance: Auto Language: English Operating system: Microsoft Windows 2000, XP, VISTA, Windows 7
Equipment:
MOTIONCAMMINILCD Waterproof case USB Cable Mounting belt Handlebar adapter Mounting system for band Instruction manual
Description:Gear shifting motorcycle riding shoe protector.Made of TPU, both durable and comfortable to wear.The shoe protector will protect your footwear from scuff marks or wear and tear caused by your motorcycle shifter.Using TPU soft rubber, wear-resistant, non slip can be adjusted according to the actual needs;Moderate thickness, comfort to wear, good anti-slip effect;Assist the shift operation without damaging the shoes, achieving a very good protection.Simple design, practical, compact, easy to carry.It is easy to wear and to care for.An versatile product, allowing you to switchyour footwear for different types of riding and still stay protected.Specification:Product Name: Moto Shoes Protector PadMaterial: TPU Soft Rubber, Antiskid BeltLength: 31cmColor: BlackSize: One size fits allNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)Package Included:1 X Motorcycle Gear Shift Pad
Materials
Leather and fabric outer. PU sole. DEOTEX® innovative technology insole.
Technical Solutions
HF shields to absorb shocks on malleolus. High strenght fabric panels on ankle and main joint area to ensure breathbility and a comfortable walking. WP membrane and finishing. Gear shifter pad. Fast laces fastening.
Universal Motorcycle Motorbike 25 LEDs Headlight Head LampDescription:Easyinstall, durableLonglasting,shockproofwaterproofBright,lowconsumptionFitment:FitformostofMotorcycle/MotorbikeSpecification:CaseColor:BlackLensColor:ClearLightSource:LEDLightColor:WhiteQuantity:1pcVoltage:12VPower:10WNumberofLED:25leds(24smallpcs,1largepc)PackageIncluded:1XMotorcycleHeadlight
For many years Premier has produced and marketed some of the best off road helmets available on the market and now in his 2017 collection, the Italian company introduces Exige, a model that combines all the Premier know-how in this specific sector. The Exige helmet has the outer shell molded in high impact resistance thermoplastic material. Its shape has been design to be particularly resistant to impacts and for the use of the neck brace. The inner shell is printed in eps of different density and in two sizes, to absorb the energy generated by an impact. In the off road helmets the internal linings are very important and for this reason on the Exige the internal padding are removable and washable, with eye-catching camouflage fabric, hypoallergenic and with Sanitized treatment, which guarantee excellent breathability and comfort. The functional ventilation system is composed of an air conveyor positioned on the upper central part of the edge of the shell, two air intakes positioned below the peak and covered by a wire mesh and another air ventilation on the chin guard. The comfortable chinstrap is equipped with double D locking ring. The helmet also has a nose guard, fixed to the top of the chin guard. The peak has been designed to offer no resistance to air, even at high speeds and it s adjustable. Like all the Premier helmets also Exige is approved according to the ECE 22-05 homologation. Sizes range from XS to XL. This Premier helmet is available in three different graphic, for a total of eight proposals.