Spidi FIRST E-TYPE

Equipment: Classic 5-pocket style without knee joint Customizable leg length Hip and knee protectors retrofit
Material: about 1.2 mm thick cowhide Lightweight lining
Upper: 100% leather
Lining: 100% polyester

Merlin Elmhurst Motorrad WachsjackeEigenschaften:Eine einzigartige Kombination aus Halley Stevensons® schottisch gewachster Baumwolle und der thermischen Outlast® Innenfutter-Technologie 8oz trocken (12oz nass) Halley Stevensons®, schottisch gewachste Baumwolle Preisgekröntes abnehmbares Outlast® 'Universe' thermoregulierendes Innenfutter Reissa® Active wasserdichte und atmungsaktive Membran Sicherheitsgeprüfte Schulter- und Ellenbogenprotektor mit sicherheitsgeprüftem Rückenprotektor Erweiterung der hinteren Schulterplatten für mehr Flexibilität und Komfort YKK®-Reißverschlüsse mit durchgehendem Antik-Finish Merlin-Druckknöpfe Mehrere Taschen (ein und aus) und Einstellpunkte Kurze YKK®- Jacke zu Hose Verbindungsreißverschluss

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Angenehmes Fleece-Futter an der BundInnenseite Stretch-Einsätze für absolute Bewegungsfreiheit Optimale Temperaturregulierung dank Belüftungssystem Robuste Dreifach-Steppnähte SAS-TEC Protektoren an den Knien. Tasche für optionalen Hüftprotektor Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Wachsbeschichtung für noch mehr Strapazierfähigkeit Zweilagiger Stoff für noch mehr Strapazierfähigkeit am Saum Reflektierende Elemente für perfekte Sichtbarkeit Anti-Rutsch-Einsatz im unteren Bereich 76cm-Verbindungsreißverschluss 2 Außentaschen 1 Cargotasche Extra robustes, farbiges YKK FlexFix® avant Druckknopfsystem Verschluss mit Druckknopf und Haken Verstellbarer Bund und Saum

The Fonus Car Cup Mount provides a simple way to keep your Smartphone securely in place for a car trip. Using your cars cup holder, the cradle safely holds your compatible Smartphone within easy viewing distance. The mount rotates 360 degrees for viewing your device in portrait or landscape mode and flexible goose neck to position your smartphone. The Car Cup Mount features an expandable base that fits any car cup holder.Specification:Material:ABSColor:BlackShrink size:7cm x 12cmExpand size:11cm x 14cmFeatures:-Fits the devices with or without a protection case.-Made by high quality and durable materials to last.-Suitable for the mo bile phone those width is 55mm-90mm-Base expands to fit any vehicle cup holder; no suction or adhesive required.-Flexible goose neck and 360-degree rotatable holder for the best viewing angle.-Adjustable grip fits i Phone, smartphones and mo bile phones. Arm grip easy release button.-Mount holds touch using your cars cup holder; lets you safely use your phone in the car.Package included:1 x HolderNote:1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.2.Please allow little differs due to manual measurement.

100% Racecraft Extra Alta Motocross BrilleRacecraft steht für die Verpflichtung von 100%, eine verbesserte Benutzererfahrung zu schaffen, indem den Fahrern ein höheres Maß an Funktionalität und eine genauere Sichtweise geboten werden. Die Synthese aus Präzisionstechnik und minimalistischem Design führt zu einer erstklassigen Brille, die so gut funktioniert, wie sie aussieht.Eigenschaften:Abstützungen: Helfen perfektes Gleichgewicht zu erreichen. Abnehmbarer Nasenschutz: Die Befestigung des Nasenschutzes gewährleistet Stabilität und Schutz unter den meisten Testbedingungen. Schaum: Dreilagiger, feuchtigkeitsregulierender Schaum. Scheibe: Anti-Fog-beschichtete Polycarbonat-Scheibe für eine einwandfreie Sicht. Die Scheibenform ist für die gesamte Produktlinie gleich. Scheibenbefestigung: Das Rückhaltesystem aus insgesamgt 9-Pins gewährleistet einen sicheren Sitz der Scheibe. In der Branche ist es zudem das Scheibenbefestigungssystem mit der höchsten Anzahl an Rückhaltepunkten. Riemen: 45 mm breit, silikonbeschichteter Riemen verhindert Schlupf. Lufteinlässe: Die zum Patent angemeldete Technologie leitet Luft in den Schaumstoff ein und unterstützt so das Feuchtigkeitsmanagement. Spezifikationen:Filterkategorie: 2 Lichtdurchlässigkeit: 25% +/-5% Im Lieferumfang enthalten:1 x 100% Alta Motocross Brille 1 x Mikrofaserbeutel 1 x Nasenschutz 20 x Abreißfolien 1 x klare Linse - 100% Racecraft Extra Alta MX Motocross Brille