Boho Dream Catcher Handmade Gift Wall Hanging Decor Art Ornament Craft 5 Circles Bead Feather For Kids Bedroom Wedding Festival Lightinthebox

Waterproof Tanking Kit containing:-Waterproof Tanking Primer for use before applying Tanking Membrane and Tanking Tape.Waterproof Tanking Membrane which forms a permanently flexible watertight membrane, applied by brush, two coats. Waterproof Tanking tape, a self adhesive joint and corner sealing tape.Waterproof Tanking Drain Mat, a self adhesive butyl backed fleece, capable of coping with movement around the drain outlet. All you need to waterproof 7.5 square metres

Socket Tray Herramienta de almacenamiento de garaje multifuncional Soporte para rack Organizador de plásticos para el hogar Accesorios Soporte de estante Reparación del hogar

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 50-125mm (2-5 in).

Replaceable jaw plates are available for all Mechanics, Fitters, multi-purpose and Engineers vices. They are hardened, CNC machined and supplied in pairs complete with screws or bolts ready to fit.Replaceable jaw plates for No.23 vice. Jaw Width. 115mm (4 1/2 in)

Carefully engineered bevel edged chisels to satisfy most professional requirements from smooth precision work to demanding carpentry applications. The specially designed two-component handle maximises control and comfort-in-use. The hardened and tempered blade is precision ground for maximum sharpness and long lasting performance, and honed ready-to-use.1 of each chisels 6mm, 12mm, 16mm, 22mm, 25mm and 32mm.in a chisel roll.