Faithfull Router Bit Tungsten Carbide Two Flute 22.0mm 1/4in Shank

The Plasti-kote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: White.Finish: Gloss.

The Squire CombiBolt3 is a unique, recodeable locking bolt with 3 die cast zinc wheels for 1,000 possible combinations. The bolt has a die cast lock body and has high pick resistance. It is simple to use and install and allows one-handed operation. The CombiBolt3 is lockable in the open and closed position for extra security. It is rustproof and suitable for harsh environments. The bolt can be used indoors and outdoors, and is ideal for the following:ShedsCupboardsStorage areasCabinetsLockersVehiclesBeach hutsBoatsInternal DoorsGatesUp and over garage doors. Specifications:Body Width: 37mm.Body Length: 90mm.Bolt: 10mm steel.Finish/Colour: Satin Chrome.

The Dormer P805 Solid Carbide Rotary Bright Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball Nosed Cylinder has the following specification: Diameter: 6.3mm.Shank Diamter: 3mm.Working Length: 12.7mm.Overall Length: 45mm.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Liberon Fontenay Base is ideal for sealing surfaces and providing a good stable working base prior to gilding. Fontenay base helps ensure even colours and helps to warm up gold colours. It is ideal for creating the distressed look on a new frame. Suitable for use on wood or plaster. It has a drying time of between 1-2 hours. Liberon LIBFB30ML Fontenay Base has the following specifications:Pack size: 30mlColour: red.

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 21 series of external bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 90° bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length 200 mm.Shaft size: 40 - 100 mm.