Irwin Mortar Rake 8mm x 2040mm 3 Cutter

AF combination spanners offset 15° - DIN 3113A. Manufactured from chrome vanadium steel with a satin finish.Size 1 5/8 AFLength 460mm

The Stanley FatMax Hi Output Professional Glue Gun 200 Watt 240 Volt with fast warm up which means it is ready to use in just 60 seconds. Its ceramic element heats up quicker and holds heat longer with a 1133g per hour output. The standby mode takes 30 seconds to get back to working temperature. The hibernate mode stores heating after 30 minutes of non-use. The gun has a dual colour LED, red when below 170° and green when ready to use. Supplied with: 6 x 12mm General Purpose Glue Sticks.6 x 12mm Formula II Super Strength Glue Sticks.6 x 12mm Dual Temperature Glue Sticks. Specification Input Power: 200 Watt. (135°-210°).Heating Time: 1 Minute.Glue Output: 1133gr/hour.Glue Sticks: 12mm Dual Temp.

The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURT has the following specifications: 2 x 45mm Excell™ laminated steel padlocks - Octagonal boron carbide shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike

Socket set 1/4in and 1/2in square drive and combination spanners with dynamic drive profile. Consisting of: 12 x 1/4in Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 & 13mm.10 x 1/4in Hex Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm.13 x 1/2in Hex Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30 & 32mm. 5 x 1/4in Phillips Bits: PH0, PH1, PH2, PH3 & PH4.3 x 1/4in Slotted Bits: 4, 5.5 & 7mm.3 x 1/4in Pozidrive Bits: PZ1, PZ2 & PZ3.6 x 1/4in Hex Bits: 3, 4, 5, 6, 8 & 10mm.8 x 1/4in Torx Bits: T8, T10, T15, T20, T25, T27, T30 & T40.3 x 5/16in Torx Bits: T45, T50 & T55.1 x 1/2in Spark Plug Socket: 21mm (13/16in). 2 x 1/4in Extension Bars: 50 & 100mm.2 x 1/2in Extension Bars: 125 & 250mm.1 x 1/4in Universal Joint, 1 x 1/2in Universal Joint.1 x 1/4in Bit Holder, 1 x 1/2in Bit Holder.1 x 1/4in Bit Adaptor, 1 x 1/4in Magnetic Bit Adaptor. 1 x 1/4in Sliding T-Bar, 1 x 1/4in Spinner Handle.1 x 1/2in T Adaptor. 1 x 1/4in Reversible Ratchet.1 x 1/2in Reversible Ratchet. 3 x Hex Keys: 1.5, 2 & 2.5mm.4 x Flex Head Wrenches: 8x9, 10x11, 12x13 & 14x15mm.6 x Combination Wrenches 8, 10, 12, 13, 14 & 17mm. 1 x Impact & Oil Resistant Case. 1 x Removable Tool Rack for Combination Spanners.

The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M5EURT has the following specifications: 2 x 50mm Excell™ laminated steel padlocks - 38mm Octagonal boron carbide shackle, 9mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike

The Thor hardwood mallets have a laminated cylindrical compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. The mallets have a conical self-locking handle and come in 3 different weights. These have an excellent resistance to impact and will give a long service life, they are suitable for hot work applications. Typical uses for these mallets include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.Weight: 750g (1 3/4lb).Diameter: 67 mm (2 3/4in).