Car Van Standard Fuse Blade Glass Puller Extractor Removal Insert Tool

Features
Classic collar with neoprene high neck roll press stud tightening on biceps cuffs with tension strap Floor lift with buckle elbow Sides and shoulders reinforced with extra resistant fabric Reinforced and foamed lumbar zone 2 outside pockets 3 inside pockets 1 waterproof wallet Connection with the trousers by zipper Buckle on the back
Material
Removable inner lining warm and waterproof breathable Drymesh 5/5 membrane to which the membrane connects.
Safety
Model Elbow Shoulder Protectors Level 2 Bag for back protector Reflective stripes on the reverse side

Visier Nexx X.R2

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Solid Formal H-line Long Sleeve Wool Blend Blazer

Features
Advanced Polycarbonate Composite Engineered Shell: Lightweight and tough. Fully-adjustable, aero-tuned visor: Reduces lift at high speeds. Ventilation System: Large intake manifolds and aero-tuned rear vents maximize airflow through the helmet. Large Eyeport: Fits all goggles and provides maximum visibility. Strap Grip: Keeps goggle strap in place. Padded Chin Strap with KwikWick™ material: Comfortable and secure. Closing chinstrap by double D ring.
AIRFIT Concept® Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! KWIKWICK2® Liner Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head.

Pointe coque Polycarbonate : Légère et supérieure s'adapter et confort en utilisant la technologie CAD de pointe. Coque aérodynamique avec port grand oeil pour une meilleure visibilité. pare-soleil intégré one-Touch : teinte fumée 3 étages réglable pare-soleil se déploie rapidement et facilement (Patent Pending). » Système de Ventilation avancé de Channeling ACS »: pleine avant/arrière d'air bouffées de chaleur et l'humidité et les sortir. Intérieur amovible, évacue l'humidité et sans odeur avec pointe tissu anti-bactérien. Dispositif de remplacement pour le bouclier RapidFire™ : Simple et sécurisé système à cliquet offre ultra rapide et sans outil de dépose et installation pour effi opération de caces. Micro boucle avec sangle de maintien : dégagement rapide et réglable. Pinlock préparé bouclier et comprend. Insérer effet anti-buée Pinlock 100 % vision Max.