Free
Support
Voiture de course 4WD à grande vitesse avec pneus à dérive extra à l'échelle de 1:16 Échelle 2.4G
This Lamborghini Huracan LP610-4 Diecast Model Car is Yellow and features working wheels. It is made by New-Ray Toys and is 1:32 scale (approx. 11cm / 4.3in long).
This BMW X5 Diecast Model Car is White and features working wheels and also opening doors. It is made by Ex Mag and is 1:38 scale (approx. 11cm / 4.3in long).
8 Pcs Original Top vente X 6 H108C H108CHD partie hélice Prop H108C-02 White/Black
Features: Color LCD to display all parameters. Built-in energy-saving backlight LCD, display better and more convenient. DC 12V and USB 5V output, available for DC lamp and phone charging. With output switch, intelligent control, easy to operate. Use single-chip microcomputer control. Fully automatic operation. With separated temperature detected circuit, high precision temperature compensation function. PWM charging mode can improve system efficiency and prolong the life span of the battery. Protection: Over-load protection; Short-circuit protection; Lighting protection; Under-voltage protection; Over-charging protection; Reverse polarity protection.
Features: With electronic compass and barometer. SP Racing F3 Flight Control With Integrated OSD for Multicopter. The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails. ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader. There MEGA328 ISP port on the back of the board, will not deadlock bootloader. Looptime up to about 2 times the previous generation based stm32F1 flight control. Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time. The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux). Tiny and lightweight. On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork. STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing. All using 2.54 interface. PDB can be more perfect combination. Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in). Dedicated output for programmable LEDs - great for orientation, racing and night flying. Battery monitoring ports for voltage and current. Sonar support for precision low-altitude hold. I2C port always powered, perfect for external sensors or always-on OLED screen. Buzzer port for audible warnings and notification. F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).
