This CAT 631 Tilt Tractor Diecast Model Truck features working articulated body, tipper body, wheels. It is made by Joal and is 1:70 scale (approx. 17cm / 6.7in long).
Features:
With electronic compass and barometer.
SP Racing F3 Flight Control With Integrated OSD for Multicopter.
The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader.
There MEGA328 ISP port on the back of the board, will not deadlock bootloader.
Looptime up to about 2 times the previous generation based stm32F1 flight control.
Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time.
The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux).
Tiny and lightweight.
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing.
All using 2.54 interface.
PDB can be more perfect combination.
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
I2C port always powered, perfect for external sensors or always-on OLED screen.
Buzzer port for audible warnings and notification.
F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).
Features:
Let you take photos without touching the camera, this can effectively avoid camera shaking and photo blur.
Half press the release button to activate the auto focus function and set the shutter speed; Completely press the release button to shoot.
For long exposure (camera should be set in Bulb mode), press the button completely and slide in in the direction of the arrow, which locks the button depressed.
Suitable for Nikon D500, D5, D4S, D4, D3S, D3, D2, D1, D800, D810, D810A, D800E, D700, D300S, D300 etc.
Cable length: 84cm / 33inch.
This Cooper T60 (Tony Maggs - French GP 1962) Resin Model Car is Dark Green and features comes in a display case. It is made by Spark and is 1:43 scale (approx. 9cm / 3.5in long).
This Ducati Desmosedici Number 29 (Andrea Iannone - Moto GP 2015) Diecast Model Motorcycle is Red and White and features working stand, steering, wheels. It is made by New-Ray Toys and is 1:12 scale (approx. 13cm / 5.1in long).