Free
Support
Specifications:Color: Black;Gold;SilverMaterial: Satin FabricSize:Front: 45cm x 70cm/17.72 x 27.56inchBack: 45cm x 75cm/17.72 x 29.53inch[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]Features:-Easy to install, no modification required.-Filter sun light to improve the efficiency of air conditioning and provide higher level of p rivacy.-Exquisite drapery design shows elegance and nobleness.-Strong p lasticity, easy to fit.Package Included:4Pcs/set x Car Window CurtainsFriendly Tips: 1.This is not customized curtains, it only have 2 different sizes(for backfront), so the effect is different for each car.2.Considering the rail viscosity, after install the rails, please install curtain after 24 hours.Note:-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.-Please allow 1-3CM differs due to manual measurement.-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.If you have any dissatisfaction or doubt about our products, please feel free to contact us, We will give you a satisfactory solution!Wish you have a happy shopping time!
Description:Sturdy and durable key ringsGreat for DIY crafts, keys, etcSpecification:Color: SilverMaterial: IronDiameter: Approx. 2.3cm/0.91Chain Length: Approx. 2cm/0.79Note:Keyrings only, other accessories are not included.Package Included:50 X Key Rings
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Description:Euro LightsFastEasy InstalledLamp with long life expectancyWaterproofWeatherproof and 100% Rust FreeSpecification:Product Name:Turn Signal LightMaterial: PlasticColor: Yellow,clear,tanSize:120x45x53mm(LxWxH)Surface Finish: PlasticManufacturer Part Number: 002001-0197Placement on Vehicle:Front ,Rear,Left, RightFitment:For BMW F 650GS 2008-2012For BMW F 800GS 2008-2012For BMW F 800R 2008-2014For BMW F 800S 2006-2010For BMW F 800 ST 2007-2011For BMW HP2 Enduro 2005-2010For BMW HP2 Megamoto 2006-2010For BMW HP2 Sport 2008-2010ForBMW K 1200R 2005-2008ForBMW K 1200S 2005-2008ForBMW R 1200GS 2004-2013For BMW K 1300R 2009-2014Note:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3. Instruction is not included,professional installation is highly recommended.4. The color of the actual items may slightly different from the listing imagesdue to different computer screen, thanks for your understanding.Package Included:1 X Pair Turn Signal Light
Angenehmes Fleece-Futter an der BundInnenseite Stretch-Einsätze für absolute Bewegungsfreiheit Optimale Temperaturregulierung dank Belüftungssystem Robuste Dreifach-Steppnähte SAS-TEC Protektoren an den Knien. Tasche für optionalen Hüftprotektor Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Wachsbeschichtung für noch mehr Strapazierfähigkeit Zweilagiger Stoff für noch mehr Strapazierfähigkeit am Saum Reflektierende Elemente für perfekte Sichtbarkeit Anti-Rutsch-Einsatz im unteren Bereich 76cm-Verbindungsreißverschluss 2 Außentaschen 1 Cargotasche Extra robustes, farbiges YKK FlexFix® avant Druckknopfsystem Verschluss mit Druckknopf und Haken Verstellbarer Bund und Saum
Specifications:- Color: White with Black, Black with Orange, Black(Option)- Material: ABS (Acrylonitrile Butadiene Styrene)- Filter Material: HEPA- Power: 120 W- C igarette lighter Length: 5m- Size: Approx. 39 x 11 x 9cm / 15.35 x 4.33 x 3.54Features:● WetDry Using● HEPA FILTERS EFFCIENTLYDouble filtration, and detachable that can be washed repeatedly.● STRONG SUCTIONHigh vacuum density, strong suction force, easy to solve the problem of garbage in the car, to make the car environment healthier.● Mechanical damping noiseHeat dissipation, make it work steadily, low noise, durable to use.● Different nozzles with different requires● It is suitable to clean the upholstery of the car, or the suede seat cover, the trunk carpet and so on.Package Included:- 1 x Car Vacuum Cleaner- 1 x EVA Flexible Pipe- 1 x Suction Nozzle- 1 x Elliptical Brush- 1 x Brush Connector- 1 x Flat Nozzle Joints- 1 x C igarette Lighter Power Supply Cable- 1 x Manual
