Free
Support
Marcrist DDM1 Core Drill Machine for drilling holes in wood, plastic, concrete, bricks, and stone. Has two speed settings, that are controlled with the flip of a switch. Reduced vibration for protection against white fingers to allow a longer drilling time. Specification Chuck Size: 13/16mm.Input Power: 1,200 Watt.No Load Speed: 0-1555/0-3000/min.Core Capacity: 152mm.Weight: 3.8kg. Sound Pressure Level LpA: 91 dB(A), KpA: 3 dB.Sound Power Level LwA: 102 dB(A), KpA 3 dB. Vibation Emmission Values: Concrete: ah ID: 8.75 m/s2, K ID: 1.5 m/s2. Metal: ah ID: 3.08m/s2, K ID 1.5 m/s2.Marcrist 2 Speed Core Drill Machine 1200 Watt 110 Volt Version.
The Byron 7960B/7960C/7960 surface mounted bell push is illuminated and can be connected to all wired Byron doorchimes. 7960B: Brass Finish.7960C: Polished Chrome Finish.7960: Brushed Nickle Finish. The Byron 7960BN Wired Bell Push has the following specification: Colour: Brushed Nickel.Weight: 100g.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 6mm
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 90 Bag 10
Arctic Spray Pipe Freeze has been used by professional plumbers for over 35 years. A 15mm copper pipe can be frozen in less than 10 minutes and the pipe will remain frozen for up to an hour, allowing ample time for the repair work to be carried out without the risk of flooding. Capable of withstanding pressures in excess of 12bar (175 psi) Arctic Spray is suitable for all pipe materials including, copper, plastic, iron and lead.