Makita 9920 240 Volt Belt Sander Variable Speed 76 x 610mm

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

ABUS 55 Series solid brass body padlock with the inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available : For most security needsOverall width: 38 mmOverall height: 60 mmOverall depth: 13 mm Shackle width: 20.5 mm I.D.Shackle height: 21.5 mmShackle Dia: 6.5 mm

The two handle arrangement provides good balance and control, it can also be used single handedly. It's powerful 1,010 Watt motor gives fast, efficient removal of material in a variety of applications. The integrated dust container provides efficient dust collection, the sander is also AirLock compatible. The top exit cordset keeps the cable away from belt area preventing interference with sanding operations. Supplied with a dust container.

The DEWALT Multi-Tool Fastcut Wood Blade, specifically designed for fast cutting. It is quick and easy to change and fits all common oscillating tools. Suitable for wood, drywall and PVC. Blade length: 43mm.Blade width: 65mm.

These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range metric sizes.Performance: conforms to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ17 socket has the following specifications:Socket size: 17mm.Length: 30mm.Weight: 52g.