Stanley 1-75-518 Basic Toolbox 16in

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

The Abus Expandable Window Grille range offers protection against basement and ground floor window break-ins. A single window as small as 500 x 300mm can be protected, multiple units can be installed to cover a range of window sizes. They provide a quick, easy secure solution especially post burglary attempts or breaks ins, providing peace of mind and security. The grilles have a thick passivated coating that is highly resistant to corrosion and can be painted if desired. They are easy to install and come with all the required security screws and fixings. 1 x ABUS Expandable Window Grille 700-1050 x 600mm

It is fitted with an ergonomically designed handle and a round collet nut. The small circumference housing is easy to grip with a conveniently located slide switch for ease of use. An anti-dust motor section protects the motor from dust and debris and prolongs working life. The tool has double insulation for increased user safety.

Blue Spot 01535 1/4 and 3/8 in Drive metric and AF socket set 40 piece consisting of:-12 x 1/4 Hex sockets 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 AF.13 x 1/4 Hex sockets 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12 and 13mm.3 x 1/4 8 Pt sockets 1/4, 5/16 and 3/8 in1 x 1/4 Spinner handle 6 in1 x 1/4 to 3/8 Adaptor3 x 3/8 Hex sockets 7/16, 9/16 and 1/2 AF3 X 3/8 Hex sockets 11, 12 and 13mm 1 x 3/8 Reversible ratchet handle.1 x 3/8 Extension bar 3 in1 x 3/8 Spin disc1 x moulded case

The Faithfull No.4 Smoothing Plane is designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm.This Faithfull No.4 Smoothing Plane is presented in a hinged, wooden storage box.

Supplied with a kitbox, the Milwaukee M12 H Compact Cordless SDS+ Hammer Drill is a 2 mode drill capable of hammer drilling and rotary drilling, for maximum versatility. Optimised drilling from 4-8mm, with max drilling of 13mm, this drill is ergonomically designed, compact and lightweight for use in tight working spaces with minimal fatigue during use.With a low vibration (6.7 m/s²) for comfortable use this drill also has an in-built LED light to illuminate the work space in dark areas. There is also REDLINK™ overload protection electronics in the tool and battery pack to deliver brilliant system durability.Batteries and charger are NOT included