The Carver Medium-Duty Rack Clamps have a variety of uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T290-450 Medium-Duty Rack Clamp has the following specification: Capacity: 450mm (18in).Reach: 90mm (3.1/2in). Overall Length: 655mm (25.3/4in).Clamping Force: 1,800N.Weight: 7.0kg.
The Britool combination spanners (metric) are crafted in chrome vanadium steel and finished in high chrome.The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.The Britool BRIE113219B Combination Spanner 24mm has the following dimensions:Size: 24mmLength: 280mmWeight: 280g
Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10
The ABUS 65 Series long shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.Shackle produced from hardened steel. Precision pin tumbler cylinder. The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 40 mmOverall height: 103 mmOverall depth: 15 mm Shackle width: 22 mm I.D.Shackle height: 63 mmShackle Dia: 6 mm
IRWIN Vise-Grip Nipper Pliers with induction hardened cutting edges to stay sharper for longer. They feature machined jaws for maximum gripping strength and moulded ProTouch grips for added comfort and less hand fatigue. TüV/GS approved.The IRWIN Vise-grip 10508151 Nipper Pliers come in the followingLength: 200mm (8 inch).
