Free
Support
AC 1- 5V 2 Pins Passive Electronic Piezoelectric Piezo BuzzerDescription:Plastic housingConvenient for connectingThey have good characters like small cubage, low wastage and high voice pressure.Specification:Working Voltage: AC 1-5VBody Size(pin not included):14 x 7mm/0.55 x 0.28(approx)Pin Pitch:8mm/0.3(approx)External Material:PlasticColor:BlackFunction:It is applied to a variety of electrical products of alarm and voicePackage Included:1 X Passive Piezo Buzzer
Description:1. LED Turn Siganal Indicator / Stop Tail Light / Reverse Light.2. Shock, Waterproof, Vibration and Dust Resistant.3. Big lamp guarantees your car can be seen.4. Suitable for cars,Trucks,Trailers,Boats.Specification:Type: LED Tail LightPlacement on Vehicle: RearColour: RedAmberMaterial: AlloyPlasticVoltage: 12 VPackage Included:1 X LED Tail Light
Auf halber Strecke zwischen einem Stadtbekleidungsstück und einer Sportjacke ist die einzigartige Street Darker Lederjacke aus geschmeidigem Trisoft Vollrindleder gefertigt, das in einem Fass gefärbt ist. Mit Einsätzem aus elastischem Gewebe, ist das Ergebnis unglaublicher Komfort, obwohl Features wie Aluminium-Einsätze an den Schultern gewährleisten, dass diese zertifizierte Jacke auch geschützt ist.ALLGEMEINE MERKMALETasche für G1 und G2 Rückenprotektor Reflektierende Einsätze Nahtlose thermogeformte weiche Einsätze 2 Außentaschen 1 Innentasche ERGONOMIETaillenverstellung Jacket-Hosen-Befestigungssystem Einsätze aus elastischem Gewebe Kragen mit weichem Einsatz HAUPTMATERIALIENTrisoft: Vollnarbiges Rindsleder gefärbt in einem Fass S1 bielastischen Gewebe LEISTUNGSSCHOCKVerbundprotektoren nach EN 1621.1 Standard zertifiziert Jacke zertifiziert nach - Kat. II - Richtlinie 89/686 / EWG Schulter mit Aluminiumeinsatz Abnehmbare Protektoren nach EN 1621.1 Standard zertifiziert TEMPERATURTF: TechFrame Innenverkleidung Lokalisierte Perforation
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
2in1 touring jacket with big leather reinforcements Features
500 D Polyamide large leather reinforcements on crash zones 3M™ Scotchlite™ reflectors AirVent ventilation zips Humax® membrane: 100 % waterproof, 100 % windproof, breathable detachable thermo lining SAS-TEC shoulder and elbow protectors certified according to EN 1621-1:2012 (protection level 2) elbow protectors are adjustable in height upgradable with back protector SAS-TEC SC-1/12 for sizes XS - XL upgradable with back protector SAS-TEC SC-1/16 for sizes 2XL - 3XL upgradable with back protector SAS-TEC SC-1/13 for sizes 4XL - 10XL connection zip
Klinge, das innovative Jet-Modell hat eine Schale enthaltenen Dimension, beschichtet mit einer Sonderlackierung Metall, das eine materielle und taktile Wirkung, im Gegensatz zu den linearen und glänzend zentrale Grafik zeichnet sich durch das Logo gibt. Klinge ist für städtische Nachwuchsfahrer, die sind sehr aufmerksam, Mode und Trends und energiereiche Stil und Farbe, ohne Einbußen bei Qualität und Sicherheit zu suchen.TECHNISCHE MERKMALE Volle Jet ABS-Schale in zwei Größen Dunkle Sonnenblende Echte Naht mit technischen Grenze Innere Polsterung mit hoher Absorption Stoff Schwitzen und mesh Stoff net Kinnriemen mit mikrometrische Schnalle Abnehmbar und waschbar innere Polsterung