Shark VZ902, visor

Jetzt nach ECE 22-05 geprüft und homologiert! Der Helm für den stilsicheren Treiber eines Crossers oder einer Enduro aus den vergangenen Jahrzehnten. Ideal kombinierbar mit unserem Son- nenschild PEAK. Hautsympathisches Innenfutter aus 95% Baumwolle. Die Helmschale ist aus GFK und da- mit uneingeschränkt lackierfähig. Mit Micro-Click Verschluß.Größen: XS(54), S(55/56), M(57/58), L(59/60), XL (61/62)Gewicht ca. 2000gECE 22-05 standard

The textile jacket is a perfect entry-level jacket. Despite the simple and simple design, the jacket offers some features that make driving as comfortable as possible. features
waterproof windproof breathable abrasion resistant tearproof
domestic equipments
HUMAX® climate membrane YF protectors on shoulders and elbows certified to EN 1621-1 removable Special foam insert removable in the back area Forcefield back protector can be retrofitted - certified according to EN 1621-1 or EN 1621-2 removable lining Upper arm width adjustment adjustable waist belt flexible snap soft collar closure all around connection zipper safety seams reflective material three outer pockets two inside pockets phone case

Introducing the all new Thor Verge Helmet. Designed from the inside out, the Thor Verge is the culmination of extensive testing, development, design and input from championship riders. Every facet has been analyzed and refined to create a pure performance helmet offering a superior fit with extensive ventilation and airflow. The Thor Verge helmet delivers the features you need for optimal performance.
Features:
Fully adjustable, 3 screw Visor provides ample coverage Front intake vents allow for direct airflow to enter the helmet Hi-Flow mouth vent with filter to prevent roost from entering Minimal gaskets reduce the overall helmet weight Antibacterial , moisture wicking , removable and washable Silver Cool™ liner for com fort rear Dual density EPS liner features extensive venting that aligns with shell vent ports Hand-laid composite fiberglass construction for superior strength with minimal weight rear exhaust vents allow hot air to escape quickly Rear shell shape quickly & easily positions the goggle strap Side vents funnel cooler air into the helmet Large hole mesh liner promotes air flow Rein forced chinbar for increased strength DOT and ECE 22.05 approved Meets AMA and FIM re quirements for helmets used in competition

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Specification:Type: 11PCS Sets5seat covers: 28*26cm2 seat front seats: 118*56cm1 backrest: 135*76cm1 rear seat cushion: 135*56cm2 shoulder pads: 22*7cmMaterial: fabricFeatures:1. Easy to install and clean, high quality.2. Comfortable, breathable, dust-proof, dust-proof and durable.3. Four seasons universal, high-end fashion.4. Universal fit, fits most vehicles.Package Included:5 * seat covers2*seat front seats1*backrest1*rear seat cushion2*shoulder pads

Feature:1.3200 PSI high pressure water gun body, brass fitting.2.Accessories of pressure washers, for cleaning the car, mechanical equipment, floors, walls, etc.Specification:NameSnow Foam Lance BottleMaterialReinforced nylon,Brass,PEHD(High Density Polyethylene)Capacity1L / 32ozSize300mm*85mm(Height * Diameter)Max. Pressure3200PSIMax.temperature60℃/140℉Nozzle MaterialBrassPackage Included:1 X NEW Snow Foam Lance Bottle1 X Adapter