Makita HP2071F Percussion Drill + Light 240v

Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 12mm leg length.Quantity: Narrow box of 650. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.

The Tacwise DGN50V Pneumatic Brad Nailer fires 18 gauge brad nails 20-50mm in length. Accurate and reliable, it features an adjustable depth control and quick release nose gate. Ideal for furniture, exhibitions, window beading and moulding, picture and mirror frames, door frames and many more applications. Specification Magazine Cpacity: 100 Brads. Staple Type: 18G & 180 20-50mm. Operating Pressure: 60-100 PSI, 86 dBA. Weight: 1.2kg.

Blank key to suit 85 Series Padlocks.85/40 Right hand Key Blank.

This Teng Tools 1/2 inch square drive Torx socket is manufactured from high quality chrome vanadium steel to conform to all the latest DIN and ISO standards. The socket is branded and labelled for easy identification, and specially designed to help prevent damage to fastenings.The TENM120711 TX-E 1/2inch square drive socket has the following specifications:Overall length 37.8mm.Size. 9.7mm (E11).

Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.