Plastikote Aerosol Fast Dry Enamel White Gloss 100 ml 102S

Marshalltown M192 cement edger designed to give a good finish on steps and verges. Stainless steel blade with sturdy mountings. Light and easy to handle with comfortable DuraSoft® handle. Size: 250 x 100mm (10 x 4in).Straight Ends with 10mm (3/8 in) Radius.

Supplied in pairs, these plastic faced vice jaws are designed to fit Faithfull vices and most other makes. They provide excellent grip without damaging soft or polished surfaces. The corner lugs are pliable and can easily be shaped to fit other vices.Size: 125mm (5 in)

The D21580K is equipped with a 1705 watt motor that produces a maximum drilling capacity of 152mm. This powerful drill makes drilling jobs quick and easy. The power tool has large and comfortable side handle for enhanced user comfort and a large rear handle enabling the user to work with while wearing gloves. The DeWalt Diamond drill has a mechanical clutch for added user protection and a lock on button for continuous operation whilst drilling with a stand.This diamond drill is prefect for electrical, plumbing or HVAC applications.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

These Forgefix single threaded Decking Screws have Pozidriv heads and are specially designed, hardened and green treated. The design of the screw helps prevent splitting the boards, and allowing them to expand and contract with the changing seasons. APPLICATIONSpecifically used in Decking applications but also widely used in exterior timber and fencing applications. The 1,000 hour green treated finish offers excellent corrosion resistance to ACQ (Alkaline Copper Quaternary) treated timber used in construction and decking applications. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Single thread screws have been designed to offer higher pull out values and quicker insertion.Decking Screw Pozi ST Green Anti-Corrosion Treated 4.5 x 75mm Bulk 1000

ALM Manufacturing Replacement Trimmer Lines to fit most models of garden trimmers. Available in various lengths and thicknesses. Manufactured in the UK. 1.3mm, 30 metres, White fits ALL Lightweight Electrics.