Autolautsprecher HERTZ DCX690.3 (2,0, 90 W, 6x9 "") (DCX690.3)

Robust cargo pants made of sturdy canvas with aramid reinforcement. These pants are reinforced with Twaron on hips and buttocks. An aramid fiber that meets the very strict standards of inspection standards 13594-2 and 13594-4. In the area of abrasion and tear resistance it performs well in the highest categories (Level 1 and Level 2). These pants come with tested Knox Flexiform knee protectors that are easy to put in or remove from the pockets. The position of the protector is adjustable in height. Both the protector pocket and the entire seat are mesh lined for maximum ventilation.

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Description: This is a universal Horn widely used for autohupe ,heavy Vehicle, Truck, Forklift ,Excavator. It is help to remindother people around the car or vehicle while makeing a loadly voice.Product performance is stable and reliable with good effect of waterproof.Specification:ModelH310TypeUniversialOperatingVoltageDC12-80VCurrent300mAPower15WDecibelsound15WHousingmaterialNylonColourBlackSpeakerdiameter70MMHornthickness40CMSpeakerheight69MMWeight260gWaterproofratingIP67ApplicableCuirtDC12-80VvoltageuniversalApplicable forExcavators,ConstructionMachinery,SpecialVehicles,ContainerVehiclesreversing,LargeVehiclesandariousreminders.Package Include:1 X Universal Horn

Leistung:2; Farbtemperatur:6000; Strahl:Flut; Ballast Eingangsspannung:12; Ballast Ausgangsspannung:12; Ballast-Ausgangsleistung:2; Menge:2pcs; Glühlampen Sockel:T10; LED Perlen Menge:15; Initial Lumen:150; Kompatible Fahrzeugmarke:GM,Ford,Toyota; Jahr:2003; Hauptanwendung:Leseleuchten; IP-Schutzklassen:IP 64; Material:PVC; Funktion:Innenbeleuchtung; Modell:Krone,Corolla,Stream,Ecosport,Highlander,Accord,Livina,Sylphy,Civic,Prado,Land Cruiser,Fit,Teana,Tiida,Odyssey,Qashqai,Previa,Geniss,X-Trail,Prius,Untersetzer,Vios,Yaris,Paladin,Edge,Mondeo,Reiz,Kuga,Fiesta,Urban,Camry,Focus; Eingangsspannung:12; Kompatibilität:Auto; Produkttyp:LED; Eigenschaften:Spotlicht; Nettogewicht:0.003; Kotierung:09/17/2014; Unterkategorie:SMD 5050; Speziell ausgewählte Produkte:COD

Kurzinfo: Navigon NaviCase - Tasche für GPS - für PNA 2100, 2110 Gruppe Tragetaschen Hersteller Navigon Hersteller Art. Nr. A02000013 Modell NaviCase EAN/UPC 4020907009117 Produktbeschreibung: Navigon NaviCase - Tasche für GPS Produkttyp Tasche für GPS Entwickelt für PNA 2100, 2110 Ausführliche Details Tragetasche Typ Tasche Empfohlene Verwendung Für GPS Informationen zur Kompatibilität Entwickelt für NAVIGON PNA 2100, 2110

Designed specifically for the female form, the Stella Missile Leather Suit is constructed from premium race-grade 1.3 mm bovine leather, punctuated with strategically-placed accordion stretch gussets and stretch fabric panels to allow for maximum rider mobility on the motorcycle. Level 1 certified Alpinestars GP-R protectors and external sliders at the joints offer unparalled impact and abrasion resistance, while localized perforations and an airflow-optimized aero hump ensure the rider stays cool and streamlined during the ride. The Stella Missile is also Tech-Air® compatible. Features
Anatomically profiled for a fully optimized female fit and constructed with premium 1.3mm genuine bovine leather. Large accordion stretch panels help movement and comfort on the bike. Strategically positioned accordion stretch panel inserts have been designed to accommodate Alpinestars airbag system, allowing expansion when the airbag inflates but also offering a high level of anatomical performance and a superior fit when riding without the system fitted. Tech-Air® compatible, Tech-Air® is the world’s first completely electronic, self-contained, full independent upper body motorcycle airbag system with no bike-to-rider set-up configurations required. An LED display on the sleeve indicates the airbag’s operational status, while an internal housing located in the certified back protector accommodates the system vest’s ECU. Hyper Resistant Stretch Fiber (HRSF) fabric panels on sleeves and crotch further improve fit and feel. Ergonomic back hump, designed specifically for the female form and sculpted for better airflow and performance at high speed. Pre-curved sleeves and legs construction to reduce rider fatigue when riding. Large perforated leather panels for maximum ventilation. Localized perforations highly improve ventilation. Stitched leather graphic details. Calf expansion gusset. Integrated padding for increased levels of rider comfort. Chest compartments are designed to accommodate the Alpinestars Stella Nucleon chest pads, available as an accessory upgrade. Knee multi-layer reinforced construction with grip texture on the bike contact area. Removable mesh inner liner for convenience and breathability. Waterproof inner wallet pocket for peace-of-mind storage. Multiple snap button system to integrate the Level 2 certified Alpinestars Nucleon Back protector. 3D textured fabric collar construction aids comfort and prevents chafing. Innovative inner cuff and calf adjusters allow riders to tailor the fit. certified Alpinestars GP-R protectors on the shoulder, elbow, knee. Innovative new elbow slider is anatomically contoured and features a removable and replaceable screw-mounted insert slider. Dynamic Friction Shield (DFS) external dual density TPU sliders on the shoulder and knee for high levels of abrasion resistance. Sport knee slider. Fully certified riding garment to Category II prEN17092 draft standards – AAA class.