TPU Remote Smart Key Cover Fob Case Shell For Mazda 2 3 4 6 CX-3 CX-5 CX-7 MX5

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Thanks to breakthroughs in the study of aerodynamic phenomena, SKWAL boasts a design and silhouette resulting from computational fluid simulations, in the aim of optimizing both stability and soundproofing at high speed. The one-of-a-kind SKWAL lines are reinforced and transformed by 3 embedded LEDs powered by a rechargeable battery (USB charging cable included). SKWAL is one of the world s first major integrated manufacturers to be equipped with this technology. Features
1,470 g Constructed from injected thermoplastic resin Pinlock MaxVision visor a standard feature Visor can be fitted with a Pinlock Max Vision® film insert Quick release visor system "Autoseal" system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold) Integrated UV380 label & anti-scratch sun visor Optimal comfort for the persons wearing glasses Micro lock buckle system Planned location for SHARKTOOTH® Interior bamboo treatment for triple effectiveness: antibacterial, anti-sweating and hypoallergenic

Neue Passform!; Vorgeformte Passform für Performance; Ratschen-Verschlusssystem an der Taille; Einsätze aus Rindsleder auf der Knieinnenseite; Einsätze aus 2-fach Stretch im Bereich von Kniekehlen, Waden und Schritt; Bewegliches Stretch-System im Steissbereich für maximale Beweglichkeit ohne Verrutschen der Hose

These gloves have an upper made of four-way stretch material that is both light and offers good airflow. Offering a pre-curved, snug fit and a seamless palm made of NanoGrip material and reinforced with synthetic suede, these gloves are minimalistic and comfortable. NanoGrip material’s fibers are 7.500 times thinner than hair and is durable and breathable, with excellent grip in both dry and wet conditions. There are Armourgel®, a superior energy absorbing solution, impact protection panels on the knuckles, third and fourth fingers. Flexible in its natural state, it hardens upon impact and thereby offers better protection the harder or faster the impact. It has a micro-injected cuff restraint for added comfort and a perfect fit. Features
3D molded, self-locating Armourgel® impact protection for knuckles, third and fourth finger Ultra-thin for maximum bike feel Nano fiber technology 7.500 times thinner than hair Very stretchy and flexible Premium dry and wet grip Touch screen optimized fingers Vented, Lite upper-hand material Pre-curved, snug fit and seamless palm reinforced with synthetic suede Micro-injected cuff restraint Multi-ply, nylon thread stitching

Feature:1. The FM Transmitter has a battery voltage detection function.2. Support bluetooth hands-free calls, built-in microphone, safe answer the phone.3. support for mobile A2DP function, even after playing bluetooth high quality mobile phone music.4. Power automatically back to the boot, automatically enter the pairing state.5. Support U disk expansion play MP3 / WMA format music.6. Comes with USB charger, output 2.1A, can charge for mobile terminal equipment.7. HD display, you can clearly show the FM frequency, song name, player status, connection status.8. Two charging ports, the output 12-24V, supplying power for your electronic equipments.Specification:Model: ER9Color: BlackRated working voltage: 12V-24VLimit working voltage: 9V~26VDual USB Output: 5V/2.1AWorking Current: 45mA(Max.)Consumption rate: 1WOperating temperature: 0 ~ 50 degreesSupport playback format: MP3/WMASignal to noise ratio: 60dBDistortion: 0.1%Frequency response: 20Hz-15KhzLeft and right channel separation: 60dBbluetooth version: 4.2bluetooth transmission distance: 10MMicrophone effective distance: 0.5-2MWorking Temperature: -10℃-70℃FM transmitter frequency: 87.5MHZ --- 108.00MHZSensitity: -92dBmSize: 95*73*50mmWeight: 86gPackage Included:1 X Wireless bluetooth Car FM Transmitter1 X Mini bluetooth Earphone1 X User Manual

Specification:ProductHeadlight BallastType of Light Bulb InterfaceD2S/D2R/ D1S/D1RMaterialAluminumColorSilverVoltage1200V DC/ 85V ACPower35W MaxWorking Life2.00Kh/DOTSize10X8.5X3cmQuantity1PcsFitment:for BMW 3series (E46) SedanWagon2002-2005forBMW3series (E46) CoupeConvertible2002-2003forBMW M3 (E46)2002-2006forBMW 6 series (E63 E64)2004-2007(just for reference)The Following AL Part Numbers Are All Compatible:1307329066/1307329 0661307329072/ 1 307 329 0721307329082/ 1 307 329 0821307329088/ 1 307 329 088Note: If your ballast Part number is1 307 329 074, The Ballast cant workPackage Included:1XBallast