MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
The Nost rear fender, is a universal fender, which can be modifid to work on all dirt bikes. material polypropylene 7.25 inches/ 184.15mm wide at ther mounting point
Jopa MX S18 pants with the print directly sublimated in the fabric guaranteeing you the brightest colors. Features Dutch hand made: The MX Gear is completely produced in the Jopa studio in Enter, Netherlands, ensuring you a high quality product. Usage of best materials: Kevlar for the knees, high quality Cordura and stretch materials. Comfortable fit: multiple stretch areas to be sure the pants is comfortable yet still durable. Directly sublimated into the fabric for optimal colors which stays bright after washing several times.
nullDescription:1. LCD digital display2. Fuel level gauge.3. 7 Colors LED Backlight Available4. Both MP/H And KM/H Are Available.5. 4 IN 1 Muti-function Gauge6.Easy to install.7.Fits for all motorcycle.8.High capacity and practical.9.General mechanical speed line interface.10.ODO/TRIP function can be switched on the black button on the back of the meter.Specification:LED Backlight Colors:7 ColorsType: Motorcycle OdometerTachometer (0-10000RPM)Shape: CircleMaterial: Iron plating + Glass surfaceColor: ChromeVoltage: DC 12VSpeedometer unit: KM/H MP/HOdometer unit: kmOdometer measurement: 0-199KM/HMirror Diameter: 67mm/2.63"Mounting hole diameter: 8mm / 0.31"Fitment:Universal Fit For All Motorcycle.Wire Connection:Black = PositiveGreen = NegativeBlue White = Oil GaugeYellow Black = Tachometer SignalSetting:1. Backlight Switch:press the button in the ODO state for 3 seconds to switch the backlight color2. KM/H MP/H Switch : Press and hold the button and then Ignite the bike.The screen displays P0000. At this time, ones place 0 will flash, long press until tens place 0 flash,then short press to make tens place display 1,Then long press until hundreds place flash,And short press 6 times to display 6. Long press until thousands place flash, Short press 6 times to display 6,then the screen shows 00466, this means 46.6HZ corresponds to 60KM/H. Short press to skip this step ,then the screen displays 1001,1001 means KM/H, if you want to switch to MPH, Lond press switch to 1002 ,Which ind
