Roland Backpack

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

3 Paar Socken mit HeatGear® Technologie und ArmourBlock®! Die Under Armour HeatGear Tech Crew Socks 3er-Pack bieten Feuchtigkeitstransport, strategische Dämpfung und ArmourBlock®. Aufgrund der Entwicklung modernster Textilinnovationen und der Einführung neuer Technologien, die zu ständigen Produktverbesserungen führen, steht das Under Armour® Fabric Lab an der Spitze der Performance-Bekleidung. Eigenschaften: 3 Paar Socken sind im Lieferumfang enthalten: Drei Paar in schwarz/grauMaterial: 97% Polyester / 3% Elasthan Crew Socke: Die Socke reicht bis über den KnöchelDas Moisture Transport System transportiert den Schweiß vom Körper wegDank der ArmourBlock® Anti Odor-Technologie wird das Wachstum von Mikroben verhindert und so der Geruchsbildung vorgebeugtEine integrierte Mittelfußstütze beugt der Ermüdung des Fußes vorNahtloser Zehenbereich und geformte Y-Ferse bieten eine perfekte, komfortable PassformUnder Armour Logo über der Ferse eingestrickt

0 - - glass reinforced nylon composition - - - - - - -

Shell
FCH Fiberglas
Innerliner
comfort lining with recessed ears and leather applications in the frontal area
Visor
retractable sun visor in shell
Lock
Micrometric Buckle
Features
M.A.R.O Anti Roll Off System ECE 22.05 Weight: 1150g +/- 50g
M.A.R.O. Anti-Roll-Off-System "M.A.R.O." (Marushin-Anti-Roll-Off) system. This is claimed to prevent the helmet from pivoting off the head from behind and to also reduce the amount of helmet roll that could hurt the rider s. neck in a crash.

Kurzärmeliges, funktionelles Teamsport-Trikot aus ClimaLite® Material für exzellentes Feuchtigkeitsmanagement: Das adidas Entrada 18 Jersey! Es ist mit dem 3-Streifen Design an den Schultern sowie mit Kontrast-Einsätzen an den Seiten ausgestattet.Größenauswahl-Hilfe: Model mit 190 cm Größe und 90 kg Gewicht trägt Größe LGrößenauswahl-Hilfe: Model mit 180 cm Größe und 74 kg Gewicht trägt Größe MGrößenauswahl-Hilfe: Model mit 173 cm Größe und 60 kg Gewicht trägt Größe SEigenschaften: Material: 100% Polyester (recycelt)Passform: LockerGrößenflag: Fällt normal aus Pflegehinweise: Maschinenwäsche, keinen Weichspüler benutzen CLIMALITE®: Bleibe trocken und fühle Dich wohl. CLIMALITE® hält Deinen Körper trocken, indem es Schweiß von der Haut aufsaugt. Trocken unter allen Bedingungen. CLIMALITE® leitet den Schweiß von Deiner Haut weg, damit Du bei jedem Schritt trocken bleibst. Schwitze, aber lass Dich davon nicht stören Rundhals-Ausschnitt mit schmaler Einfassungadidas Logo auf der rechten Brust als Heat Transfer Druck3 Streifen sind an beiden Schultern angenäht

Mavic Crossmax Light 29 Pair Boost XD NT