Nicholson Half Round Second Cut File 8in

Luxuriöse Perlen-Optik mit unserem Perlen-Pen gestalten! Inhalt: 25 ml Farbton: Flieder Anwendung: Tube zuvor schütteln. Kleine perlenförmige 3-D Punkte auftragen, die Tube dabei senkrecht halten. Mehrere Perlen aufeinander reihen. Trocknungszeit je nach Dicke des Farbauftrages 2-6 Stunden. Auf Wasserbasis.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1.3/4 x 7 Box 200

50 Faltpapiere im Duo-Design, 10 cm x 15 cm, 110 g/m², mit beidseitigem Druck (Dekor/uni), für tolle Effekte bei Faltobjekten. Vorderseite: Vintage / Rückseite: altrosa. Ideal zum Basteln der Falt-Blume "Flora" und des Falt-Sterns "Venus".

These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. The milled face aids gripping of the nail head when striking. Made in the USA.The ESTE615SM Ultra Framing Hammer has the following specifications: Weight: 425g (15oz).Handle length: 406mm (16in).

The Facom BP.Z46A Plastic Organiser has storage for parts (9 removable partitions), hand tools (central compartment) and power tools (6 removable partitions). The large central compartment stores hand tools (screwdrivers, hammer, etc.) meaning that all tools readily visible and accessible. The several compartment provide a variety of layouts and avoids mixing the parts. It has a new closure with integral spring, for easy opening and closing. Specification Capacity: organiser 2 x 6 Litre + Central Base 4.7 Litre.Max Load: 15kg.Dimensions (L x D x H): 42.6 x 31.6 x 23.4cm.Weight: 2.67kg.