Free
Support
SPIDI Traveler 2 is an ideal blend between adventure touring and sport touring capabilities. Its short cut, along with the aerodynamic design, provide greater comfort at high speed. Safety
Prepared for back protector Lev. 1 and lev. 2 Force-Tech removable protectors EN 1621-1:2012 shoulder and elbows protectors
Comfort
Removable lining with wadding 100 gr. Prepared for thermo lining L30 man (not included) Vented H2OUT lining
Performance
Two jackets in one Waterproof outside pocket Vents Zip fastener to join jacket/trousers Average weight 2,0 Kg
Ergonomy
Integrated adjustment system Ergofit System Adjustable waist fastening Draw-ties for reducing the volume of sleeves and chest Adjustable drawstring tightening Adjustment and EST fastening
Materials
High tenacity polyester fabric Reflex zones for night-riding Punched mesh fabric
Maintenance
Wash by hand below 40 °C Do not bleach Drip line drying Iron at maximum sole plate temperature (110 °C) Do not dry clean Do not wring
Wählen Sie Ihre eigene, leicht zu merkende 4-stellige Kombination Leichtes, selbstrollendes Stahlkabel Zum Schutz der Lackierung mit Vinyl beschichtet Schnellverschluss Jubilee clip-style Halterung
Outer garment
Cow leather Stretch inserts
Protectors
Adjustable knee protectors Adjustable hips protectors
Comfort
Body Fit Outside pockets x2 Removable leg bottom elastic Jacket-trouser connection zip Knee gusset Ankle zips
Lining
Fixed mesh lining
Spidi Super Hydro is the new reference for those looking for maximum protection from water, a high level of therm and a sober design. The special "ROBUST" fit ensures a good fit to different body types.
Technical features:
6.6 double layer Nylon outer fabric, with Teflon treatment Waterproof and breathable H2Out membrane laminated to the outer fabric Tenax Flex inserts to facilitate the guidance Forcetech protectors on shoulders and elbows Possibility to insert Warrior back protector certified EN1621-2 Level 1 and Level 2 Ability to insert certified chest protectors Chest and Thorax Warrior Warrior Thermal padding in hollow fiber wadding 200 gr/sq Perimeter zipper for attachment to trousers 4 outside pockets including two waterproof EST Micrometric closure system on the neck Velcro fastening on the sides and sleeves Drawstring narrowing on the bottom "ROBUST" fit Product weight: kg. 2,15Two jackets in one product - Inner jacket usable as a stand alone Integrated adjustment system
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Feature:Small compact size.Made of high quality and durable material.170 degree adjustable wide viewing angle with high sensitivity definition.Dustproof and waterproof.Low power consumptionmaintenanceWorks as a revising camera or security camera.Advanced the security when use it as a security camera.Outstanding rear view visibility on your car, boat, trailer, truck, vehicle.Easily mount the camera at any place of the carbody, it could be used as front view / side view / rear view camera.The camera with IR LED and Night Vision.Specification:Image Sensor: 1/3 SONY CCDType: Rear View CameraConnectivity: WireLens angle (Deg.): 170 degreeWaterproof: YesColor: BlackWorking voltage: DC12VPackage Included:1 X Car Rear View Camera1 X TV Cable1 X Power Line