Bering Kayak, gloves women

60 second sonic cleansing brush for superior facial cleansing luxury soft brush head 2 speeds to suit different skin types usb rechargeable waterproof - ipx8

Specification:MaterialAluminum alloyColorSilverSizeAudio decorative ring diameter: 25mmIgnition decorative ring diameter: 41mmAir conditioning button decorative ring diameter: 45mmApplicationTucson 2016 2017Package Included:1 X Ignition Decorative Ring2 X Audio Decorative Ring2 X Air Conditioning Button Decorative Ring

Urban Outdoor glove made of twisted polyester fabric, internal insulating layer in Thinsulate and ilining in microfleece. Closure with wrist strap. Touch screen on index. – heating system with 4-level adjustment button -Power system Dual Power allows you to use gloves with different types of power supply: Direct connection to a 12 volt source (motorcycle battery) – Connection to two 12-volt Li-PO batteries to be inserted into the glove cuffs- Connection to two 7.4-volt Li-PO batteries to be inserted into gloves cuffs for those activities that do not require a high heating intensity. inside Hypora membrane to make them completely waterproof. Features Connection type
Battery, Cable, Dual Power
Material
Hypora membrane, Polyester, Thinsulate, Touch screen index
Technical information
12 V - 37.0 W -3.2 AH 7.4 V - 15.0 W - 2.0 AH
Duration 12V
Level 1 (White) - 5:00 hours Level 2 (Blue) - 3:30 hours Level 3 (Purple) - 2:30 hours Level 4 (Red) - 2:00 hours
Duration 7.4V
Level 1 (White) - 6:00 hours Level 2 (Blue) - 4:30 hours Level 3 (Purple) - 3:30 hours Level 4 (Red) - 2:30 hours
Please remember, power supplies are not included!

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr