Free
Support
The ABUS 65 Series long shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.Shackle produced from hardened steel. Precision pin tumbler cylinder. The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 40 mmOverall height: 103 mmOverall depth: 15 mm Shackle width: 22 mm I.D.Shackle height: 63 mmShackle Dia: 6 mm
1 Bogen (ca. 21 cm x 30 cm) mit dekorativen 3-D Sticker "Deluxe Pavillons" in verschiedenen Größen (ca. 8,8 cm x 5,7 cm bis 11,2 cm x 8,5 cm) und Designs, silber.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
Pour randonner en toute sécurité et découvrir l'ensemble du littoral et des massifs forestiers et montagneux. Echelle 1 : 25 000 Accédez gratuitement par QR code à différents services pour préparer vos activités de plein air.
Hochwertiger Stanzer für Bordüren-Stanzungen. Mit diesem Stanzer können Sie aus beliebigem Papier (120 bis 240 g/m²) zauberhafte Spitzen-Bordüren stanzen. Eine einzelne Stanzung hat dabei ein Maß von ca. 3,4 x 5,7 cm. Legen Sie das Papier so in den Stanzer, dass es mittig an der Führungsleiste anliegt. Drücken Sie nun den Hebel für die erste Lochung nach unten. Arbeiten Sie sich so zu einer Sei...
Replaceable jaw plates are available for all Mechanics, Fitters, multi-purpose and Engineers vices. They are hardened, CNC machined and supplied in pairs complete with screws or bolts ready to fit.Replaceable jaw plates for No.23 vice. Jaw Width. 115mm (4 1/2 in)