Nordic Decoration Home Sculpture Middle Finger Statue Ornament Home Desk Decoration Resin Craft for Room Decor Accessories Lightinthebox

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 90 Bag 10

The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURT has the following specifications: 2 x 45mm Excell™ laminated steel padlocks - Octagonal boron carbide shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike

Fisco Combination Square set for use outside and inside as a try square, mitre square, depth and marking gauge. It has a lightweight zinc stock and the rule has ground edges and ends. The centre head enables the accurate location and marking of the centre of circular items. The graduated protractor head can be turned through 360° for measuring and constructing angles. Size: 300mm/12in.

Ronseal 5 Year Woodstain is independently guaranteed by the BBA to waterproof and protect your exterior wood for a full 5 years. The easy to apply woodstain has been specially developed to give ultimate protection against all types of weather. It keeps the wood dry by preventing excess water from entering the wood whilst allowing moisture inside the wood to evaporate to prevent cracking, peeling, blistering and surface mould growth. Rainproof in one hour. Suitable for bare or previously stained wood, and ideal for doors, window frames, cladding, garden furniture and all smooth planed timber.Ronseal 5 Year Woodstain provides a high satin sheen in the shade of your choice giving a beautiful, durable finish to the wood whilst allowing the natural grain to show through.2 coats is normally enough but untreated wood may need 3. It is touch dry in 1 hour and can be re-coated in 4 hours. Areas of use: Exterior doors and windows. Approx coverage: 20 Litre² covered per litre.Approx number of coats: 3. Finish: Semi transparent Satin.Application: Brush. Drying time Approx: 1 hour.Protection level: Very High. Available in various shades and sizes.Ronseal 5 Year Woodstain is supplied in a tin with re-sealable lid. Colour: Black Ebony.Size: 750ml.

The Bahco LTS-30-E Open Reel Fibreglass Tape has a nylon coated fiberglass blade that shows both metric and imperial graduations. The blade can withstand pulling force of around 500kg. Debris can be easily washed from the blade.

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.