Scorpion Belfast Byway, jet helmet

AUX Audio CD Cable For iPod iPhone iPad MP3 For Ford Focus Mk2 C-MaxFeatures:Simpleinstallation,plugandplayIdealforconnectingyouriPhone,iPod,MP3toyourvehiclesAllowingyoutolistentomusicthroughthecarradioduringdrivingSpecification:Material:PlasticShellHousingTotalLength:43.3inch(1.1M)Color:BlackQuantity:1Compatibility:iPhone,iPod,iPad,MP3Note:OnlyworkwithstereosthathavetheAUXbuttonandNOTCDDJstereos.(thestereoswith6cdsbuiltin)Fitment:2005-2014FordFocusMk22003-2014FordC-MAXMk12003-2014FordMondeoMk32006-2014FordS-MAX2006-2012FordConnect2006-2012FordTransitPackageIncluded:1XAUXAudioCable

Schutzausrüstung Schultern, Ellbogen und Rücken Urban Tech Festes Netzfutter Belüftungssystem Höhenverstellbare Ellbogen Innentaschen

Description:1.LED lamp lighting without delay, does not affect the car function.2.low power consumption3.Suits to all kinds of cars4.Flexible strips5.Multicolor -15 colorsSpecification:Cover type: PVC pipeLight source type: RGB 5050Applicable models: general purposeCurrent: 0.9AVoltage: 12VPower: 50WService life: 30000 hoursLight flux: 300LMMaterial:PlasticPackage Included:10 X RGB 10CM 3SMD lamp bar1 X Voice Controller1 X ABC Remote Control1 X Shape Remote Controller1 X Color Box1 X Battery(build-in)

Hachoir Coinbox Disponible en 2 tailles différentes

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

5 Speed Car Gear Shift Knob PU Leather Black / Silver For VW Golf MK5 MK6 MK7Specification:Model: C01043Product Name: Gear Shift KnobColor: Black / SilverMaterial: PU LeatherSpeed: 5 Speed R12345Dimension: 113.5mmx48mm(LXW)Qty: 1pcFeatures:1.Made by excellent leather, durable;with 5 speed and black edge cap.2. Your hand can feel good while control the knob as its smooth surface and comfortable design.3.Easy and quick installation.Simply Remove your old or broken one and put on the new one.Fitments (The Compatibility Is Just For Reference. Please Compare Your Original One Before Purchasing!):For VW GOLF MK5 (2003-2009)For VW GOLF MK6 (2008-2012)For VW GOLF MK7 (2012-)For VW SCIRROCO (2008-2014)For VW JETTA (2005-2010)For VW EOS (2006-)Note:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There are no instructions included in this kit.Professional Installation Is Highly Recommended.Package Included:1 x Gear Shift Knob