Komfort/Ausstattungtemperaturregulierend, kühlt im Sommer optimale Atmungsaktivität nahtlos verarbeitet in 3D-Stricktechnologie (seamless) bakteriostatische Wirkung, antibakteriell und geruchsneutralisierend durch SILVERPLUS®-Ausrüstung MaterialHeld-Strechfit
The F5 is the ultimate all-day helmet. Designed 100% from the ground up, only the best designs, years of rider feedback, testing data and cutting-edge technologies are integrated into this revolutionary lid. Combining extremely low weight, intuitive venting, and next-gen safety features, KLIM has engineered the F5 to provide the best possible riding experience in the most demanding environments, all day Features Full Klim® Karbon fiber shell One of the lightest helmets in the industry Extra large eye port for maximum field of vision Dual density eps Wind tunnel tested Fid-Lock® strap closures (extremely easy to take helmet on and off) ventilation Most ventilated helmet in the industry 18 intakes and 8 exhaust vents Direct vent eps design Designed to intake air at speed / exhaust heat while at low speeds or stopped safety Shell structure designed for maximum strength while remaining lightweight Neck brace compatible Exceeds ECE certifications comfort Focus on fit Anti-microbial and antibacterial materials Moisture-wicking Drylex® comfort liner 3 shell sizes and 3 eps sizes for the best fit and maximum comfort to fit your head like a glove Helmet bag Breath box Windstopper® liner Extra peak visor/hardware
Introducing the all new Thor Verge Helmet. Designed from the inside out, the Thor Verge is the culmination of extensive testing, development, design and input from championship riders. Every facet has been analyzed and refined to create a pure performance helmet offering a superior fit with extensive ventilation and airflow. The Thor Verge helmet delivers the features you need for optimal performance. Features: Fully adjustable, 3 screw Visor provides ample coverage Front intake vents allow for direct airflow to enter the helmet Hi-Flow mouth vent with filter to prevent roost from entering Minimal gaskets reduce the overall helmet weight Antibacterial , moisture wicking , removable and washable Silver Cool™ liner for com fort rear Dual density EPS liner features extensive venting that aligns with shell vent ports Hand-laid composite fiberglass construction for superior strength with minimal weight rear exhaust vents allow hot air to escape quickly Rear shell shape quickly & easily positions the goggle strap Side vents funnel cooler air into the helmet Large hole mesh liner promotes air flow Rein forced chinbar for increased strength DOT and ECE 22.05 approved Meets AMA and FIM re quirements for helmets used in competition
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
These gloves have an upper made of four-way stretch material that is both light and offers good airflow. Offering a pre-curved, snug fit and a seamless palm made of NanoGrip material and reinforced with synthetic suede, these gloves are minimalistic and comfortable. NanoGrip materialâs fibers are 7.500 times thinner than hair and is durable and breathable, with excellent grip in both dry and wet conditions. There are Armourgel®, a superior energy absorbing solution, impact protection panels on the knuckles, third and fourth fingers. Flexible in its natural state, it hardens upon impact and thereby offers better protection the harder or faster the impact. It has a micro-injected cuff restraint for added comfort and a perfect fit. Features 3D molded, self-locating Armourgel® impact protection for knuckles, third and fourth finger Ultra-thin for maximum bike feel Nano fiber technology 7.500 times thinner than hair Very stretchy and flexible Premium dry and wet grip Touch screen optimized fingers Vented, Lite upper-hand material Pre-curved, snug fit and seamless palm reinforced with synthetic suede Micro-injected cuff restraint Multi-ply, nylon thread stitching
