Specification:Material: MetalColor: SilverSize: Approx. 2x4x11.3mm/ 0.08x0.16x0.44Made of hard metal, these kind of tire stud screws are strong and durable in use.It has a low ground pressure and it is environmentally with minimum impact.It is easy to install with certain drill and can match well with your vehicle tires.Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread.This kind of screws are suitable for most of tires and add ultimate off-road capacity to your ordinary car, truck,motorcycles,etc. It brings a good anti-slip property for your tires.Installation:1. Drill (using a very small bit) down from the center of chosen knob into the tire.2. Drill a screw up from inside to out. If the angle isnt perpendicular to the tire, it will stick out one side or the other.Do one hole and screw at a time.3. Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two layers of tape.Package Included:100 X Tire Stud Screws
Contemporary look, top-of-the-range comfort. A long winter glove that combines full-grain cowhide construction on the topside (for durability), a soft TPR reinforcement panel on the upper side of the hand, and soft protective padding on the forearm. All of this gives the WFX State a contemporary look, and, more importantly, top-of-the-range comfort. It features a Hipora membrane for weatherproofing, and 180g Thinsulate lining to protect from the cold. The palm side, in full-grain goatskin leather (for suppleness) hosts a Polyurethane protective shell. Double-closure system featuring an adjustable tab combined with a wide Velcro closure strap. Reflective components ensure nighttime visibility, but keep a low profile during daylight hours. The WFX State will easily take you from state to state, because it’s just as effective in the city as it is for touring. Features Full-grain goatskin construction (topside and palm) Weatherproof internal Hipora® membrane Thinsulate™180 g thermal insulation Soft TPR metacarpal-knuckle protection TPR protective palm slider shell Goatskin palm reinforcement Dual closure system
The latest innovative GAERNE GX1 ENTRY-LEVEL boots for motocross and offroad combines technology with style and offers maximum safety with optimal comfort. The GAERNE GX1 boot is made with special high-quality materials. The new DUAL-TECH ANKLE SYSTEM is unique in this price range and has been completely integrated into the design. This technology provides stability and flexibility and thus prevents over-extension of the foot during back and forth movement as well as twisting. Taking advantage of the technology developed for the high-end SG12, SG10 and Fastback boots, the GX1 combines strong protection features with high levels of comfort. The concept with the 4 interchangeable aluminum buckles provide for a simple, fast and accurate closure. By adjusting the upper two buckles, the calf width can be regulated, thus also space for a knee orthosis. At the presentation to the trade press, this boot was priced VERY GOOD. Features High-quality, durable cowhide with plastic protectors DUAL-TECH ANKLE SYSTEM for more safety and flexibility Adjustable calf width by displacing the top two buckles Shin and knuckle protection highly comfortable fit Shaft height about 36 cm Microfiber lining with ergonomically shaped inner padding 4 wide aluminum buckles, adjustable and easily replaceable Suede grip guard and heat protection Switch reinforcement made of sturdy plastic anatomically shaped, replaceable footbed The replaceable sole has a steel core and is oil and gasoline resistant the toe is protected by a steel toe with grippy and stable double-stitched GAERNE MX-OFFROAD-GOODYEAR sole
Classical 3in1 touring jacket Features 450 D Polyamide Hitena® reinforcements on crash zones (100 % Polyamide) 3M⢠Scotchlite⢠reflectors AirVent ventilation zips detachable Humax® membrane: 100 % waterpoof, 100 % windproof, breathable detachable thermo lining YF protectors on shoulder and elbow certified according to EN 1621-1:2012 elbow protectors are adjustable in height upgradable with back protector SAS-TEC SCL-S 19 for size 36 upgradable with back protector SAS-TEC SCL-M/L 19 for sizes 38 - 46 2 waterproof outer pockets, 1 waterproof inner pocket safety seams
'Soft Active Jacket Evo' ist eine 100% Made in Italy Multisport-Sicherheitsjacke bestehend aus Rückenschutz (genehmigt EN1621-2 Lev.2), Arme, Brust und Rippen Protektoren. Enthält Polsterungen an der Seite des Halses (HCD - Helmet Contact Dämpfer). Die Jacke besteht aus elastischem Wabennetz und Lycra®-Einsätzen. Die Rückenprotektorinnenfläche wird von S.R.T. (Sweat Removing Textile - sehr transpirierende 3D Textil, die Schweiß nach außen überträgt). Der elastische und verstellbare Bund sorgt für die Stabilität der gesamten Jacke. Die geringe Dicke der Polsterung, das leichte Gewicht und die hervorragende Passform der Jacke sorgen für hervorragende Stabilität und Komfort.zusätzliche Information:Technologie Moto geprüft, Schutzklasse 2, Made in Italy, Neu, Perfekte Passform, Süße Entferner Textil, Transpirierend Verwendet Cross, Enduro Leistung 5 + / 5 Flexibilität 5 + / 5 Gewicht 5 + / 5 Atmungsaktivität 5 + / 5 Ausführung 5 + / 5 Stabilität 5 + / 5 Belastung 5 + / 5
Features Thermoplastic Externall shell Removable and washable liner Removable and washable cheek pads Santitized hygienic treatment for inner fabrics Helmet interior anatomically designed Painted and UV-coated outer shell Lower protection rubber Adjustable peak Ventilation system Air extractors Micrometic retention system 1350gr
