5 Speed Gear Shift Knob PU Leather Black/Silver For VW Golf MK5 MK6 MK7

Features
waterproof, windproof and breatheable through Humax climate membran removable quilted lining comfort collar with neoprene completion adjustable at sleeve and hip 2 outside pockets 2 inside pockets
Safety
removable protectors on shoulders and elbows SAS-TEC protectors retrofitted on back safety seams in accordance with ISO 4916
Material
heavy duty 600D polyester fabric fabric reinforcement at ellbow and shoulder Humax climate membrane breathable mesh lining

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Feature:1. Perfect auxiliary lighting solution in low speed2. Dense LEDs cover more areas, provides high density intense and smooth beam3. Efficient circuitry design to maximize light output per watt consumed, minimal waste of light4. Oval-shaped spot beam add a punch light in the center of road5. Always light up in the direction you intend to go6. Oversize external fin design, full aluminum profile doubling as heat sinkSpecification:MaterialAluminum profile, PC lensLED Type3030 LED chipsLED Quantity24pcsPower72WVoltageDC 12VColor TemperaturePure White 6000KWorking Temperature-40℃~+85℃Waterproff RateIP67Life Span100000 hoursGross WeightAround 580gApplication:1. Off-Road vehicles-ATVs, SUV, truck, Fork lift, trains, boat2. Specialized vehicles-Fire engine, police cars, rescue vehicle, communication vehicle, military command vehicle, etc.3. Engineering vehicles-Excavator, dozer, road roller, bulldozer, rane and mining truck, etcPackage Included:1 X LED Work Light1 X Bottom Slip1 X Set Necessary Mounting Accessories

Feature:1. The FM Transmitter has a battery voltage detection function.2. Support bluetooth hands-free calls, built-in microphone, safe answer the phone.3. support for mobile A2DP function, even after playing bluetooth high quality mobile phone music.4. Power automatically back to the boot, automatically enter the pairing state.5. Support U disk expansion play MP3 / WMA format music.6. Comes with USB charger, output 2.1A, can charge for mobile terminal equipment.7. HD display, you can clearly show the FM frequency, song name, player status, connection status.8. Two charging ports, the output 12-24V, supplying power for your electronic equipments.Specification:Model: ER9Color: BlackRated working voltage: 12V-24VLimit working voltage: 9V~26VDual USB Output: 5V/2.1AWorking Current: 45mA(Max.)Consumption rate: 1WOperating temperature: 0 ~ 50 degreesSupport playback format: MP3/WMASignal to noise ratio: 60dBDistortion: 0.1%Frequency response: 20Hz-15KhzLeft and right channel separation: 60dBbluetooth version: 4.2bluetooth transmission distance: 10MMicrophone effective distance: 0.5-2MWorking Temperature: -10℃-70℃FM transmitter frequency: 87.5MHZ --- 108.00MHZSensitity: -92dBmSize: 95*73*50mmWeight: 86gPackage Included:1 X Wireless bluetooth Car FM Transmitter1 X Mini bluetooth Earphone1 X User Manual

Plus Size Bandage Retro Boots

Multi-dimensional functionality for life on the road. Supple sheepskin leather conforms for comfort, integrated plastic knuckle armor for those nasty encounters with the asphalt, and now a Touchtec leather palm to use your touchscreen devices without removal of the glove. Convenience, Comfort, Crash-worthiness: the Icon PURSUIT TOUCH Glove has just leveled up. Features
ToucTec™ Leather Palm Allows You To Use Your Touchscreen Device With Your Gloves On Pittards® Sheepskin Backhand For Great Fit Integrated Knuckle Armor Secure Wrist Closure Keeps The Glove In Place Expansion Gussets To Improve Overall Flexibility Colorway is Goatskin With TouchTech Palm