Free
Support
Features
Thermoplastic Externall shell Removable and washable liner Removable and washable cheek pads Santitized hygienic treatment for inner fabrics Helmet interior anatomically designed Painted and UV-coated outer shell Lower protection rubber Adjustable peak Ventilation system Air extractors Micrometic retention system 1350gr
12V RedGreen Stainless Steel LED Bow Navigation Light For Marine Boat YachtDescription:Easytostallwithpredrilledholesandwire.MorebrightwithLOWconsumption.Wide-angle,highidentificationSpecification:LightColor:redgreenSize: 5*6cmMaterial: StainlessSteelHousing,PolycarbonateLens.Voltage: 12VQuantity: 2pcsDegree:112.5degreeforindividualVisibility: 1nmPackage Included:1 X PairNavigationLights
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Specification:StandardQIColorBlackLight SignalRed Light Flashing:Clip arm automatic expansion and contractionGreen Light always on:ChargingGreen Light Flashing:Foreign body detectedOutput Power9V/1.1A or 5V/1AInput Power9V/1.67A or 5V/2ACharging PowerAndriod 10W/ IOS 7.5WCharging Distance8mmCharging Rate73%Adapter9V/1.67A or 5V/2APower on InterfaceType-C Data CableSizeOpen Arm Length:82mm(Max)/60mm(Min)Height:118mmThickness:33mmFitmentFor4-6.5 inch width(6cm-9cm)mobile phoneFeatures:1. Qi standard charging, compatible for most of Qi standard smartphone.2.Infrared sensing design,clamping the phone automaticly.3. 360 rotation, you can freely adjust the mount to get the desired angle.4. Have quick charging performance, the phone can charge full quickly.5.Touch sensor button design, just need to touch to take out phone.6.Equipped with soft silicone pad, non-slip and stable.Package Included:1 X Car Wireless Phone Charger HolderCompatible Phone Models:AppleiPhone 8, 8 Plus,iPhone X, iPhone XS,iPhone XRSamsungS9,S9+,Galaxy Note8, S8, S8+,S7,S8 Active, S7 Edge,S7 Active, S6, S6 Edge,S6 Edge+,S6 Aactive, Note 5, Note 7, Note 7 FE(Support fast wireless charging)LGG2, G3, G Pro, G6 Plus, V30,V30sThinQGoogleNexus4, Nexus5, Nexus6, Nexus7NokiaLumia 820,Lumia 830,Lumia 920,Lumia 925,Lumia 928,Lumia 929,Lumia 930,Lumia 1020,Lumia 1520,8Sirocco, 735, 950, 950XLHTC8X (US version), Droid DNA, ThunderboltMotorolaMoto Maxx, Droid Turbo 2, Turbo/Mini, Moto 360 Smart WatchSONYZ30, Classic,Xperia X
Every stitch of PRIME PRO racewear was designed with intent and purpose. Utilizing premium materials and detailed craftsmanship, PRIME PRO is our most advanced racewear to date. Built around the notion that unrestricted mobility, minimal weight and athletic fit all allow the rider to work more efficiently with the motorcycle, PRIME PRO is designed to reduce interference between man and machine. From concept to creation, PRIME PRO was developed with insight and testing from our elite riders to deliver next level performance. Bring a little slice of paradise to your ride. With an artist inspired “aloha” vibe, the Floral kit is sure to set you apart from the sea of monotony on the starting gate. Built on our signature PRIME PRO chassis, the Floral kit is made for hangin’ loose and getting pitted. Features
Hybrid fit with set-in style tailored sleeves Taped collar and cuffs Minimal seams for maximum comfort Fully ventilated arms and back panel Moisture wicking material keeps you dry Tail silicone print helps keep jersey tucked in Flat-stitched seams minimize irritation
Comfort
Collar with Neoprene inserts Waterproof, windproof and breathable garment MAX LINER Plus insulating jacket
Ergonomy
Neck EST adjusting control Adjustable drawstring tightening Integrated adjustment system Adjustable waist fastening Straps to adjust and fasten protectors
Material
Vented leather Reflex zones for night-riding Microfleece Capillary lining allows fast removal of sweat Punched mesh fabric Stretch and waterproof fabric, comfortable fit 3 layers transpiring, waterproof and windproof system Water repellent coating Hi visibility fabric High tenacity Nylon 6.6 triple twisted
Performance
Two jackets in one Vents Zip fastening to join jacket and trousers Resealable vented panels
Safety
Arrangement for holding Warrior Chest Force-Tech removable protector En 1621-1:2012 Level 2 Back Warrior Evo Inside optional Level 2 Back Warrior B1 Inside optional Arrangement for holding (Lev. 2) back protector