Nail punches are designed to drive nail heads below the surface of the wood. Square head provides a large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head.Size. 1/16 in.Length 4 in
Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).Crown (mm) 10.0 Length 6 SKU STCR501906E Finish GALV Point CP Description STCR5019 STAPLE 6MM GALV 5M Qty per box 5000
Juego de extractor de tubo manual de herramienta de abocinado universal de 5-19 mm para herramientas de refrigeración de cono excéntrico de ángulo de cobre y latón de 3/16 a 3/4 pulgadas
The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.
The ALM WX150 Spool & Line is suitable for: Qualcast: CGT36LA1, CG18LA1, Mac Allister: MGTP 18 Li, WorX: WG150, WG151. Compares to: WBZ01101002A00. Line Diameter: 1.5mm.Line Length: 2.5m. Manufactured in the UK.
The Stanley FatMax Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft-grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Flared Tip Size 5.5mmBlade Length 150mm (6 in)
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
