Replacement irons (blades) are available for all Stanley block and specialist planes.All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed.All cutters are fine rotary ground to give a flat surface that is easier to sharpen.G : Denotes suitable for old style planes.To fit 112060 Plane 60. 1/2G.(old style)Size of Cutter 1.3/8in
The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).
Marcrist DDM1 Core Drill Machine for drilling holes in wood, plastic, concrete, bricks, and stone. Has two speed settings, that are controlled with the flip of a switch. Reduced vibration for protection against white fingers to allow a longer drilling time. Specification Chuck Size: 13/16mm.Input Power: 1,200 Watt.No Load Speed: 0-1555/0-3000/min.Core Capacity: 152mm.Weight: 3.8kg. Sound Pressure Level LpA: 91 dB(A), KpA: 3 dB.Sound Power Level LwA: 102 dB(A), KpA 3 dB. Vibation Emmission Values: Concrete: ah ID: 8.75 m/s2, K ID: 1.5 m/s2. Metal: ah ID: 3.08m/s2, K ID 1.5 m/s2.Marcrist 2 Speed Core Drill Machine 1200 Watt 110 Volt Version.
The Carpenters TC hammer is an ergonomically designed hammer, forged in one piece with an I-profile for increased durability with a vibration damping urethane plug. The shape of the striking face is right angled to the handle. The claw opening and angle give the best possible grip on the nail and it has a thin, strong claw for easy access without leaving marks, and it is rounded to prevent it tearing your trousers. The ergonomically designed handle with clear end stop is available in two sizes: L and XL.Handle size: XL.Overall weight: 720g / 26oz.
Four piece router bit set for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Set contains:1 Straight Cutter: 12.7mm x 60mm x 1/2in shank 2 Straight Cutters: 12.7mm x 50mm x 1/2in shank 1 Flush Trim Cutter: 12.7mm x 25.4mm x 1/4in shank
The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 50 mmOverall height: 77 mmOverall depth: 18 mm Shackle width: 28 mm I.D.Shckle height: 29 mmShackle Dia: 8 mm