Marcrist DDM1 Core Drill Machine 2 Speed 110 Volt

The Irwin carbide tipped mortar rake cutters are ideal for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable,pipes and switchboxes. They can be used with the Irwin mortar raker sole plate and small angle grinders.The Irwin IRW10507229 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size: 8.0 x 20/40mm

The Bulldog Square Punner (tamper) has a one piece head design and a large, square, solid-cast head. The handle is made from tubular steel. It is ideal for finishing work on asphalt surface, to tamp up close to walls and corners where mechanical rollers leave ridges or cannot get access. Part of Bulldog's Premier Agricultural Tool range, manufactured to the highest possible specification to guarantee quality. Made In Britain.

Marking gauge made from moulded plastic. The plastic stock has an abrasion resistant metal insert and the stem is calibrated for easy setting.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

The Faithfull Business Document/Laptop Trolley Bag is ideal for all types of business trips allowing you to store and carry your laptop, documents and sundries all together in one convenient portable bag. This versatile trolley bag provides a variety of zip up compartments containing an assortment of large document pockets which can also be used to hold clothing for overnight trips etc. Several small pockets ideal for mobile phones, calculators etc. and individual pen storage pockets. Constructed from tough hard wearing Nylon material, the bag features a carry handle and is fitted with integrated wheels and a telescopic 3 stage locking handle that retracts into a zippered compartment when not in use. It makes working / travelling lighter on the back as the easy to manoeuvre roller blade style wheels allow the bag to glide along with ease. It has 4 zip up compartments, 1 lockable laptop compartment suitable for laptops up to 17in, 15 assorted internal compartments, plus an internal 66cm locking retractable trolley handle (95cm overall length including case).

The RIDGID Matador Vices are professional bench vices for the workshop, that have an all forged steel construction, that is 3 times stronger than cast iron. They have a large hardened anvil, with hardened and serrated jaws for maximum durability, and machined and hardened sliding surfaces. The rolled twin start Acme thread provides precise operation and longevity with a removable steel spindle nut and measuring scale.RIDGID 160 Matador Vice Jaw Capacity: 225mm.Weight: 25.0kg.