Pailletten, metallic, 15 g, Ø6 mm, pink

Farbiges Wachsornament Teddy-Motiv, ca. 7 bis 8 cm, geprägt.

Flexovit Waterproof Sanding Sheets can be used wet or dry and is a highly flexible high quality Silicon carbide abrasive. Waterproof paper is specially treated making it ideal for use with water or other lubricants. The paper lasts longer and gives a smoother finish when used wet as the water cleans, lubricates and helps prevent clogging. Size: 230 x 280mm.Packed in 3s

20 Bogen Sticker mit Federn (20x 1 Design), Spiegelfolie (16 Bogen), Lackfolie (2 Bogen) und Perlmuttfolie (2 Bogen), jeweils mit Gold- oder Silberkontur. Größe je Bogen: ca. 23 x 10 cm.

These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat White 1.50mm Box 100

Stoff-Buch aus Baumwolle zum Selbstgestalten, ca. 23,5 cm x 25,5 cm, 12 Seiten, naturweiß. Waschbar bei 40°C. Ideal zum Gestalten mit Textilfarben, Bügelapplikationen, Hot-Fix Bügelsteinen und Vielem mehr. Gestalten Sie liebevolle Stoffbücher, ihrer Kreativität sind keine Grenzen gesetzt.

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5