Flexovit emery cloth sanding sheets have an incredibly strong cloth backing for increased product strength and durability. Can be torn into strips for detailed work and is suitable for hand or power tool use. Ideal for removing rust, paint and scale from metal surfaces. The fine grits are also ideal for preparing and polishing metal. Size: 230 x 280mm.Grit: 150 (Very Fine).Pack quantity: 25.
Has a long lifetime thanks to high-quality components made of aluminium and steel. Optimum handling, due to the ergonomic handles with softgrip and low centre of gravity for optimum handling. Anti-slip surface prevents the tool from falling over. Specification Toolholder: 28mm Internal Hexagon.Input Power: 2,000 Watt.Impact Rate: 1,000/bpm.Impact Energy: 69 Joules.Weight: 29.5kg. Noise/Vibration Information Measured values determined according to EN 60745. Total vibration values (vector sum of three directions). Vibration level (chiselling) : 8.0 m/s².Vibration level (drilling/chiselling) : 8.0 m/s².
The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.ABUS 70IB/50HB80 50mm Brass Marine Padlock 80mm Stainless Shackle Keyed 6401
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
