Spidi Super, leather jacket

Double spoiler with incorporated air extractors: optimization of the aerodynamic trail and internal cooling. Autoseal system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold). SHARK skin peak side fastenings: passive reduction of aerodynamic noise. Micro-tech interior with antibacterial properties under the AEGIS label. Features
Constructed from carbon aramid fibre Integrated UV380 label & anti-scratch sun visor Double D-ring strap Visor can be fitted with a Pinlock Max Vision® film insert 2 shell sizes : optimal morphological adjustment Optimal comfort for the persons wearing glasses Quick release visor system Removable and washable cheek pads and lining (Use the delicates or cold cycle and place inside a washing net) Planned location for SHARKTOOTH® AEGIS-lining

Description:For marine boat yacht navigationWaterproof design, easy to stall and durability.Specification:Name: 5Pcs marine boat yacht LED navigation lightModel: 648964Material: Acrylonitrile butadiene styrene ABS plastic housingVoltage: 12V DCSize: 75 x 65 x 55mmBulb: LED bulb,12V 100mA.Visibility: 1 nautical mileBoat size: 12m(40ft)Fitment:For boat yacht navigationPackage Included:1 X Red Port Light1 X Green Starboard Light1 X Masterhead Light1 X Stern Light1 X 360 Degree Anchor Light1 X Product Manual

Features
Thermoplastic Externall shell Removable and washable liner Removable and washable cheek pads Santitized hygienic treatment for inner fabrics Helmet interior anatomically designed Painted and UV-coated outer shell Lower protection rubber Adjustable peak Ventilation system Air extractors Micrometic retention system 1350gr

The Legion jacket is a completely adaptable piece of racewear. It transforms from fully-padded, warm coverage to a ventilated vest with only a few zipper pulls. Constructed of Dobby Polyester Fabric, it features a multitude of intelligent, secure and weatherproof storage options dominating all conditions. 600D Dobby Polyester main body fabric Removable sleeves converts jacket into vest with rear storage pocket YKK Zippers throughout, 3 secure zippered pockets on main body DWR Water repellent coating Large zippered vents on main body Hydration hose access

Phantom S is a High Resistant Thermoplastic (HRT) flip-up helmet for the most discerning touring riders. Its double P/J certification makes it suitable for use in both the jet and full-face versions. With its special Airoh® Combined Ventilation System (ACVS), this helmet provides maximum comfort even under extreme use conditions. Phantom S is designed for riders looking for freedom and unique, safe experiences even in long-distance rides. Its extra wide visor ensuring an excellent field of view, its sun visor, a revolutionary internal windstopper housing, a special position of the visor preventing fogging, an integrated Pinlock® lens and the opportunity to connect Bluetooth systems complete its wide range of conveniences for an ultimate riding experience. Features
Thermoplastic HRT 1690gr +- 50gr 1 shell size Top Vent Chin guard vent Rear spoiler Removable and washable inner lining (Hypoallergenic) Micrometric system Anti-theft ring Nose cover Pinlock® in the box P/J Homologation Inner sun screen visor A.C.V.S. ventilation system
Visor
Tool-less quick release Extra-wide vision Antifog visor Scratch resistant UV resistant Block system

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr