Free
Support
Specification:MaterialAluminum alloyColorSilverSizeAudio decorative ring diameter: 25mmIgnition decorative ring diameter: 41mmAir conditioning button decorative ring diameter: 45mmApplicationTucson 2016 2017Package Included:1 X Ignition Decorative Ring2 X Audio Decorative Ring2 X Air Conditioning Button Decorative Ring
* Premium cotton * aramide fibre twill lining * Fixed mesh lining for improved breathability | Article: Merlin Vixen Ladies Motorcycle Hoodie, black, Size S for Women | Article: Merlin Vixen Ladies Motorcycle Hoodie, black, Size S for Women, black, Size S for Women
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Feature:Input voltage:12-24VOutput voltage/current for charging function:Max5V DC/3.1A(1A Port +3.1A Port)3.1A port for car charger usingSupport USB reading (1AUSB port )/TF CardDisplay shows frequency car battery voltageFrequency:87.5-108.0MhzSupport folder switch functionSupport WMA/MP3 formatSupport A2DP music playingSupport handsfree functionCar battery voltage displayOperation and condition voice promptSpecification:bluetooth V4.0Supports A2DP/SBC/AAC/HSP/AVRCPSupport format:WMA/APE/FLAC/WAV/MP3Echo elimination and denoisingBT connect distabces:5 metersbluetooth control:SPP for android and BLE for IOSbluetooth Connection:Power on the FMT first, there is a prompt voice:bluetooth is ready to pairTurn on your smart phone bluetooth, search the FMT with the name of HY82After connected, there is a prompt voice: bluetooth connected successfullyThen you can use bluetooth to play music from your smart phone or answer a call by hands freePackage Included:1 X bluetooth Car FM Transmitter1 X User Manual
MATERIALEN Vielseitige 3 in 1 Jacke Atmungsaktives 3D Textilmaterial an Brust und Rücken, und Mesh-Einsätze an den Ärmeln Air Flow Process : Belüftung über Mesheinsätze im Rückenbereich Wasserdichter und atmungsaktiver, herausnehmbarer Einsatz Mit Reiβverschluss herausnehmbares Winterfutter KOMFORT Herausnehmbarer Kragen mit ein kleinem, festen Neoprenkragen CHARAKTERISTIKENStandardkragen Weitenregulierung durch Klett am Kragen Weitenregulierung mit Druckknöpfen an den Handgelenken Verstellbar an den Ärmeln mit Schnalle und Druckknöpfen Weitenregulierung an den Hüften durch Klett Klappe unter Reiβverschluss an der Vorderseite 2 Ausentaschen 2 Futtertaschen 2 Innentaschen 1 Wasserdichte Tasche 360° umlaufende Reiβverschlussverbindung in Taillenhöhe Reflektierende Logos an Brust, Ärmel und im unteren Teil des Rückens