Free
Support
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
leichtester und beweglichster O‘NEAL-Handschuh Silikonaufdruck sichert eine gute Haftung lang haltbares und flexibles Material für den perfekten Sitz und Halt super leichter Handschuh mit aufgedruckten, kräftigen Graphiken nahtlose Fingerkuppen Handfläche aus Synthetikleder mit doppellagiger Daumenverstärkung verstellbarer Handgelenkverschluss
Description:Sturdy and durable key ringsGreat for DIY crafts, keys, etcSpecification:Color: SilverMaterial: IronDiameter: Approx. 2.3cm/0.91Chain Length: Approx. 2cm/0.79Note:Keyrings only, other accessories are not included.Package Included:50 X Key Rings
The certified Andes Touring Glove features a double wrist closure to help keep glove in position and seal out the elements, while its premium, multi-material chassis incorporates the innovative Outdry® bonded membrane for guaranteed waterproofing and breathability but without excessive material bulk in order to provide improved sensitivity on the bikeâs controls. Construction
Premium leather, suede, softshell and advanced stretch textile main chassis Softshell and stretch fabric on the backhand for freedom of movement Soft viscoelastic PU foam compound knuckle guard which is ergonomically profiled Reflective inserts to increase rider visibility Features an innovative heat-bonded outer shell membrane construction Outdry®, which provides an impenetrable layer with no seams, preventing water collecting between layers Rubber reinforcements with foam padding on thumb and palm Leather stretch accordions on fingers and thumb to increase flexibility and fit
Protection
Certified level 1
Features
Ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement Double hook and loop grip closure system on wrist Long cuff design offers extended coverage of wrist area Touchscreen compatible finger-tip
Specification:Color: Black White, Black Red, Beige, CoffeePlacement of vehicle: RearMaterial: Velvet,Sponge,Fabrics,Polyester FiberFeatures:1.Warm fabric, breathable sponge.2.Soft, comfortable, breathable product.3.Resistant to moisture,durable and long service life.4.Silicone backing, non-slip, no shifting.Package Included:1 X Car Seat Cover Kit
Phantom S is a High Resistant Thermoplastic (HRT) flip-up helmet for the most discerning touring riders. Its double P/J certification makes it suitable for use in both the jet and full-face versions. With its special Airoh® Combined Ventilation System (ACVS), this helmet provides maximum comfort even under extreme use conditions. Phantom S is designed for riders looking for freedom and unique, safe experiences even in long-distance rides. Its extra wide visor ensuring an excellent field of view, its sun visor, a revolutionary internal windstopper housing, a special position of the visor preventing fogging, an integrated Pinlock® lens and the opportunity to connect Bluetooth systems complete its wide range of conveniences for an ultimate riding experience. Features
Thermoplastic HRT 1690gr +- 50gr 1 shell size Top Vent Chin guard vent Rear spoiler Removable and washable inner lining (Hypoallergenic) Micrometric system Anti-theft ring Nose cover Pinlock® in the box P/J Homologation Inner sun screen visor A.C.V.S. ventilation system
Visor
Tool-less quick release Extra-wide vision Antifog visor Scratch resistant UV resistant Block system